Office of Steam Logo_1

Author Topic: Weldon/Monarch  (Read 134 times)

Nick

  • Administrator
  • Engineer
  • *****
  • Posts: 8119
  • Location: Minnesota, USA
Weldon/Monarch
« on: January 26, 2020, 09:38:25 am »
Here's one that my knowledge is really lacking on... Seen these listed as both Weldon and Stewart Monarch...

These are quite large and heavy for a toy steamer. I am not sure about the exhaust line or the throttle on the steam line... And the chimney looks much taller than others I have seen...













Nick

Scorpion2nz

  • Full Member
  • ***
  • Posts: 680
Re: Weldon/Monarch
« Reply #1 on: January 26, 2020, 10:03:20 am »
Yours had a SV ?  Then it is a Weldon
Should be no exhaust line and no regulator , chimney should short and fat .

Cheers
Dennis

Nick

  • Administrator
  • Engineer
  • *****
  • Posts: 8119
  • Location: Minnesota, USA
Re: Weldon/Monarch
« Reply #2 on: January 26, 2020, 10:09:00 am »
Yours had a SV ?  Then it is a Weldon
Should be no exhaust line and no regulator , chimney should short and fat .

Cheers
Dennis

Thanks for clearing that up Dennis!

It is nice having the regulator so I will probably keep it... The top of the boiler is full of dents, so this one is far from perfect.

This one has travelled the world, I bought it from a friend in the UK
Nick

txlabman

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3593
  • Location: Plano, Texas
Re: Weldon/Monarch
« Reply #3 on: January 26, 2020, 10:52:25 pm »
Very nice Nick.

Congrats!