Office of Steam Logo_1

Author Topic: jkbixby's table  (Read 4905 times)

  • Sr. Member
  • ****
  • Posts: 1076
  • Location: Gahanna, Ohio
jkbixby's table
« on: February 28, 2020, 10:15:05 am »
I really wanted to make a video of my Overbrook Court Light Railway but it turned out that my camera doesn't like LED lighting, at least in movie mode so......here are too many still pictures.

[ Guests cannot view attachments ]
I found out that my outside layout was great for about six months a year but not so during winter and/or inclement weather so I started trying to build one indoors. First try was on the floor under the O gauge layout which didn't work well for many reasons. Then I tried using one level of the workshop shelves which worked out well with the addition of hinged dust covers. The shelf is 2' wide and total overall length is 35' so it's a reasonable run in a dogbone shape with 40" and 80" radius curves using Sunset Valley 45mm track.

[ Guests cannot view attachments ]
The station is a Thorley Miniatures (TM) kit that was kitbashed to alter its' shape to fit the area.

[ Guests cannot view attachments ]
Standing beside the station inside the south dogbone loop looking north.

[ Guests cannot view attachments ]
The goods shed is another TM kit which, like most of the other buildings, has had an interior and lighting added.

[ Guests cannot view attachments ]
Thorley's End, a TM kit, was fun trying to get something that looked like a set of levers included.

[ Guests cannot view attachments ]
The elevated building (TM) was built to add a little vertical element to the scenery.

[ Guests cannot view attachments ]
The coal stage is TM while the water tank is British Building Kits.

[ Guests cannot view attachments ]
The turntable is SwiftSixteen, a very nice kit.

[ Guests cannot view attachments ]
The engine house is TM, with quite nice detail included.

[ Guests cannot view attachments ]
The tavern (kit bashed from extras left over from station) and the coal dealer are both TM.

[ Guests cannot view attachments ]
The yard is strictly three tracks and even that was hard to achieve using the standard radii of 40" and 80".

[ Guests cannot view attachments ]
The last picture is looking south from the north dogbone loop.

Hope you all enjoyed the somewhat overlong tour of the Overbrook Court Light Railway and will come back someday when I have a video - thanks!


Regards,
Larry

  • Sr. Member
  • ****
  • Posts: 1076
  • Location: Gahanna, Ohio
Re: jkbixby's table
« Reply #1 on: February 28, 2020, 10:32:14 am »
Noticed I got the same picture twice but don't have the courage (or knowledge) to change it within the original post so here's the missing picture of the tavern and the coal dealer.
[ Guests cannot view attachments ]
Regards,
Larry

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4122
  • Location: Plano, Texas
Re: jkbixby's table
« Reply #2 on: February 28, 2020, 10:57:32 am »
Looks great Larry.

Now you have options for all weather conditions!

Looks like it can provide hours of fun.

Thank you for participating in GPU 2020! 🤠

  • Full Member
  • ***
  • Posts: 546
  • Location: Land of Lincoln Illinois
Re: jkbixby's table
« Reply #3 on: February 28, 2020, 12:05:54 pm »
Always sunny and dry at the indoor railway. Thanks for showing it!
Give us this day our daily Steam
And deliver us from Diesels
          Bret

  • Administrator
  • Engineer
  • *****
  • Posts: 9192
  • Location: Minnesota, USA 🇺🇸
Re: jkbixby's table
« Reply #4 on: February 28, 2020, 01:02:06 pm »
Such a great idea, I don't see any reason to leave that basement  ;)  :D

LED's can be troublesome with video... Do you have a smart phone to try taking the video?
Nick

  • Full Member
  • ***
  • Posts: 356
Re: jkbixby's table
« Reply #5 on: February 28, 2020, 02:47:05 pm »
What a great layout, Garden railway indoors is a good idea if you have the room. Love it.
ALWAYS WORKING TO FIND A CURE FOR CENOSILLICAPHOBIA
Cheers. Dave.

  • Sr. Member
  • ****
  • Posts: 1818
  • Location: The Winter Wonderland, Michigan.
Re: jkbixby's table
« Reply #6 on: February 28, 2020, 04:39:50 pm »
Wow Larry, that was all in your basement? Nice looking set up.
Tommy

"Steam it, like you mean it."

  • Global Moderator
  • Engineer
  • *****
  • Posts: 5156
  • Wherever you go ......... there you are!
  • Location: Eastern Sierra
Re: jkbixby's table
« Reply #7 on: February 28, 2020, 08:37:18 pm »
Hey Larry .... that looks really amazing!

Can I come over to play???
"Information is not knowledge, Knowledge is not wisdom, Wisdom is not truth, Truth is not beauty, Beauty is not love, Love is not music: Music is THE BEST...   
Wisdom is the domain of the Wis (which is extinct). Beauty is a French phonetic corruption of a short cloth neck ornament currently in resurgence..."
F. Zappa ... by way of Mary, the girl from the bus.

  • Administrator
  • Full Member
  • *****
  • Posts: 540
  • Location: Houston, Texas
Re: jkbixby's table
« Reply #8 on: February 28, 2020, 08:39:01 pm »
Larry, I can only imagine the amount of time / love you've put in to this.  Very very impressive.  Just don't plan on moving any time soon  ;)
Scott

  • Jr. Member
  • **
  • Posts: 204
  • Location: Belgium, Niel bij as
    • Stoomwereld / Steam World / Dampfwerld
Re: jkbixby's table
« Reply #9 on: February 29, 2020, 03:09:11 am »
Your setup looks better each time I see it, top
Danny
"Das lied schläft in der Maschine"
(the song sleeps in the machine) lyrics Einsturzende Neubauten song "Nnnaaamm"  http://stoomwereld.webnode.be

  • Jr. Member
  • **
  • Posts: 251
Re: jkbixby's table
« Reply #10 on: February 29, 2020, 04:14:07 am »
Excellent, post a video if you get the lighting sorted.


Len.

  • Sr. Member
  • ****
  • Posts: 1076
  • Location: Gahanna, Ohio
Re: jkbixby's table
« Reply #11 on: February 29, 2020, 09:45:26 am »
At Nick's suggestion I took a video using my iPhone - a little shaky trying to work the transmitter with one hand (tied down the valve gear on the Tx) and take a movie with the other. At any rate at least there's steam in action with the benefit of a morning run.
Regards,
Larry

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4122
  • Location: Plano, Texas
Re: jkbixby's table
« Reply #12 on: February 29, 2020, 11:13:30 am »
Fantastic Larry.

You did a nice job on the video.

Thanks for making the effort.

  • Administrator
  • Engineer
  • *****
  • Posts: 9192
  • Location: Minnesota, USA 🇺🇸
Re: jkbixby's table
« Reply #13 on: February 29, 2020, 11:55:17 am »
At Nick's suggestion I took a video using my iPhone - a little shaky trying to work the transmitter with one hand (tied down the valve gear on the Tx) and take a movie with the other.

Thank you Larry!! that video was very well done, especially if you had the transmitter in your other hand  8)

I'm looking at all the junk I've been saving in my basement (including bubble wrap and peanuts) and thinking I need to have a big clear-out and do something similar...  8)
Nick

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4122
  • Location: Plano, Texas
Re: jkbixby's table
« Reply #14 on: February 29, 2020, 01:01:01 pm »
At Nick's suggestion I took a video using my iPhone - a little shaky trying to work the transmitter with one hand (tied down the valve gear on the Tx) and take a movie with the other.

Thank you Larry!! that video was very well done, especially if you had the transmitter in your other hand  8)

I'm looking at all the junk I've been saving in my basement (including bubble wrap and peanuts) and thinking I need to have a big clear-out and do something similar...  8)

What do you need bubble wrap and peanuts for Nick?

The inflow always exceeds the outflow according to your wife. 🤠