Here are my two layouts featuring Wilesco. The larger board is 20 X 30 inches, the smaller one is 12 X 16 inch.
They were made years apart, but made so they can be driven together. Also, by removing a drive band, the larger layout
can be split.
Neatly done Bret
I like how it can be run separate or all as one
Excellent set-up Bret.
Thank you for sharing and for participating in GPU 2020. 🤠
Thanks for the kind responses. My first try at posting pictures on this forum. Glad it went well.
You did a great job on splitting the larger one, I'm not sure if I see the seam. Must make it easier handling and storage.
That's really great setup, well thought out and executed - very nice!
Great set-up and very nicely laid out.
When you upload a picture you can select from the drop down the 3rd choice which is inline full sized image.
Very interesting the way you've made these setups both modular and sub-modular. Well thought out and beautifully executed!
Nice collection Bret. Probably the most Wilesco accessories I've seen in one place.
That is a great looking Wilesco setup. As noted, the modular construction is well executed and works very well.
Nice layout of your Wilesco accessories .
You did a great job on splitting the larger one, I'm not sure if I see the seam. Must make it easier handling and storage.
The board doesn't split. You can remove the drive band between the line shafts to drive either the three or four accessories separately. Or use two engines and drive both halves individually.