Office of Steam Logo_1

« previous next »
Pages: [1]

Author Topic: Cheap imported hit-miss engine  (Read 1241 times)

  • Jr. Member
  • **
  • Posts: 74
Re: Cheap imported hit-miss engine
« on: August 15, 2021, 06:37:40 pm »
I finally decided to correct the rod problem.  The connecting rod was loose on the bearing shells.  After removing the rod cap, I discovered that the bearing shells covered less than 2/3 of the crank shaft. Should be an easy fix. 
Logged
Pages: [1]
« previous next »