Office of Steam Logo_1

« previous next »
Pages: [1] 2

Author Topic: Some small PMR Peanut Rider Mods  (Read 1015 times)

  • Administrator
  • Engineer
  • *****
  • Posts: 6274
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Some small PMR Peanut Rider Mods
« on: February 16, 2021, 10:18:38 pm »
Some small PMR Peanut Rider mods that I have been mucking around doing in the shed as the weather has been not to stinking hot.

Took Nicks advice and cut the red back on the flywheel.....wow what a difference that made. Looks like a completely different engine and to me more upmarket and expensive :)

Turned up some brass bolts to replace the PMR screws -

[ Guests cannot view attachments ]

Very carefully hand filed the top of the shaft support (a mill would be too rough) and then super carefully drilled to take some friction fitted oiler cups that I turned up -

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

Just checking that the brass bolts will fit -

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

I'll put some more up below this post.
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

  • Administrator
  • Engineer
  • *****
  • Posts: 6274
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: Some small PMR Peanut Rider Mods
« Reply #1 on: February 16, 2021, 10:25:52 pm »
Oil cups -

[ Guests cannot view attachments ]


Also made an 'ember catcher' I have some stainless steel flyscreen (it comes painted black)and fitted it into the part I made that sits in the PMR chimney. I'm not sure if I'm 100% sold on the look of it yet. Its sitting too high, but I didn't want to cut down the PMR stack -

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

  • Administrator
  • Engineer
  • *****
  • Posts: 9191
  • Location: Minnesota, USA 🇺🇸
Re: Some small PMR Peanut Rider Mods
« Reply #2 on: February 16, 2021, 10:30:35 pm »
Looking good Jim  8)  Definitely going to have to add oil cups to mine
Logged
Nick

  • Administrator
  • Engineer
  • *****
  • Posts: 6274
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: Some small PMR Peanut Rider Mods
« Reply #3 on: February 16, 2021, 10:36:33 pm »
Quote from: Nick on February 16, 2021, 10:30:35 pm
Looking good Jim  8)  Definitely going to have to add oil cups to mine

The red off the flywheel ...PMR should save on red paint  ;D

I think that was off within the same hour that I'd seen yours off  ;)
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

  • Administrator
  • Engineer
  • *****
  • Posts: 9191
  • Location: Minnesota, USA 🇺🇸
Re: Some small PMR Peanut Rider Mods
« Reply #4 on: February 16, 2021, 10:41:01 pm »
Quote from: Jim on February 16, 2021, 10:36:33 pm
Quote from: Nick on February 16, 2021, 10:30:35 pm
Looking good Jim  8)  Definitely going to have to add oil cups to mine

The red off the flywheel ...PMR should save on red paint  ;D

I think that was off within the same hour that I'd seen yours off  ;)

Not going to go ahead with the hot pink flywheel? 😂
Logged
Nick

  • Administrator
  • Engineer
  • *****
  • Posts: 6274
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: Some small PMR Peanut Rider Mods
« Reply #5 on: February 16, 2021, 11:19:12 pm »
Quote from: Nick on February 16, 2021, 10:41:01 pm
Quote from: Jim on February 16, 2021, 10:36:33 pm
Quote from: Nick on February 16, 2021, 10:30:35 pm
Looking good Jim  8)  Definitely going to have to add oil cups to mine

The red off the flywheel ...PMR should save on red paint  ;D

I think that was off within the same hour that I'd seen yours off  ;)

Not going to go ahead with the hot pink flywheel? 😂

Can't show Jen, she might say "oooh I like that " :) :) :)

[ Guests cannot view attachments ]
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

  • Administrator
  • Engineer
  • *****
  • Posts: 9191
  • Location: Minnesota, USA 🇺🇸
Re: Some small PMR Peanut Rider Mods
« Reply #6 on: February 16, 2021, 11:23:35 pm »
 :D  :D  :D


50 seconds in, pink and brass. Gotta admit, this one looked good!  8)

Logged
Nick

  • Administrator
  • Engineer
  • *****
  • Posts: 6274
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: Some small PMR Peanut Rider Mods
« Reply #7 on: February 16, 2021, 11:28:39 pm »
Quote from: Nick on February 16, 2021, 11:23:35 pm
:D  :D  :D


50 seconds in, pink and brass. Gotta admit, this one looked good!  8)



LOL Jenny just walked past and I showed her....got the thumbs up  :D
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

  • Full Member
  • ***
  • Posts: 855
Re: Some small PMR Peanut Rider Mods
« Reply #8 on: February 17, 2021, 09:28:00 am »
Quality workmanship Jim!
Logged

  • Global Moderator
  • Engineer
  • *****
  • Posts: 5596
  • Location: St. Paul Indiana
Re: Some small PMR Peanut Rider Mods
« Reply #9 on: February 17, 2021, 12:33:02 pm »
Looks real good Jim , topnotch mods on that one.
Logged
Bruce, St. Paul Indiana, USA
"Originality thrives in seclusion free of outside influences beating upon us to cripple the creative mind."
  Nikola Tesla

  • Administrator
  • Engineer
  • *****
  • Posts: 6274
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: Some small PMR Peanut Rider Mods
« Reply #10 on: February 17, 2021, 03:01:27 pm »
Thanks all.
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

  • Full Member
  • ***
  • Posts: 855
Re: Some small PMR Peanut Rider Mods
« Reply #11 on: February 17, 2021, 05:32:36 pm »
You guys are killing me with the nice mods on this engine that seems relatively easy to personalize....while I wait for my shipment to arrive :'(
   I have a mod in mind I have not seen anyone do yet...for now it will remain under wraps, but if it works I will sing like a Canary! 8) 
Logged

  • Administrator
  • Engineer
  • *****
  • Posts: 6274
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: Some small PMR Peanut Rider Mods
« Reply #12 on: February 17, 2021, 08:30:03 pm »
Quote from: ShadetreeMotorcycle on February 17, 2021, 09:28:00 am
Quality workmanship Jim!

Not really, I'm just a backyard metal basher.
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

  • Global Moderator
  • Engineer
  • *****
  • Posts: 5596
  • Location: St. Paul Indiana
Re: Some small PMR Peanut Rider Mods
« Reply #13 on: February 17, 2021, 09:41:20 pm »
Quote from: Jim on February 17, 2021, 08:30:03 pm
Quote from: ShadetreeMotorcycle on February 17, 2021, 09:28:00 am
Quality workmanship Jim!

Not really, I'm just a backyard metal basher.
A metal basher of the highest order Sir 😉😊👍
Logged
Bruce, St. Paul Indiana, USA
"Originality thrives in seclusion free of outside influences beating upon us to cripple the creative mind."
  Nikola Tesla

  • Administrator
  • Engineer
  • *****
  • Posts: 6274
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: Some small PMR Peanut Rider Mods
« Reply #14 on: February 17, 2021, 09:59:21 pm »
Quote from: St Paul Steam on February 17, 2021, 09:41:20 pm
Quote from: Jim on February 17, 2021, 08:30:03 pm
Quote from: ShadetreeMotorcycle on February 17, 2021, 09:28:00 am
Quality workmanship Jim!

Not really, I'm just a backyard metal basher.
A metal basher of the highest order Sir 😉😊👍

Way to kind my friend, its seeing work like what you produce Bruce that gives me the incentive to have a go at learning new skills and trying different things.
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

Pages: [1] 2
« previous next »