Not so much a car as a wood display base on wheels with belt drive.
I did not order as I thought $70 a bit steep for wheels that can not steer. I did order the engine only for a lesser price. The manufacturer is the same as the QX6 horizontal Stirling In one of my other threads. Upon closer look, the wheels on this model appear to be Flywheels off of QX6!
The engine does look a class up from QX6 with dual Flywheels mass and glass Cyl bore it should make more power. Perhaps I will mount my engine on base with front wheels that steer so it could be set to run in circles on the kitchen table.
[ Guests cannot view attachments ]
Just found this version for $58
You give up the wood base for sheet metal and gain a wind screen around the flame but still no steering.
[ Guests cannot view attachments ]
Ok that answered that, I wondered where the heat source came from.
I finally found a video and was correct in thinking the wood base model makes more power with glass Cyl bore. I am warming up to this version...if one where to fit o-rings as tires it would nearly silence it's rolling sound, then modify it to steer so you don't have to chase it then it would start to be quite appealing, also saw a video if you put a little stand under the drive wheels lifting them only about 1mm it functions as a stationary engine. I found some discount codes so may give it a go.
https://youtu.be/I9rvGeMuSQs