Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines
Builds, Repairs, Show Your Machines! => Collections & Pictures => Topic started by: jerseysteam on June 03, 2019, 09:03:15 am
-
(https://live.staticflickr.com/65535/48303884372_98281ab6ec_b.jpg)
Nick, what with kids and all, you really dont need this dangerous thing laying around. If you'd like I can store it here, free of charge, and keep it maintained and running for you. All as I said free of charge of course
-
Oh oh...showing us a peak at what must obviously be a Mamod....
I'll have to sneak it out of the steam room in a few days, don't want anyone to find out about another new purchase ;) :D :D
Until then... a little Fleischmann roller
(https://live.staticflickr.com/65535/48304592772_b89938117a_b.jpg)
-
Oh oh...showing us a peak at what must obviously be a Mamod....😉
-
Dang cheap eBay BIN's... ::)
(https://live.staticflickr.com/65535/48332898397_7f23029793_b.jpg)
-
Another that I sold a long while back to Steaminon
(https://live.staticflickr.com/65535/48304550841_c611c225ba_b.jpg)
(https://live.staticflickr.com/65535/48304665362_2670821f56_b.jpg)
-
My Case wannabe
Still teasing me with that one ;)
You could build one of your own....
-
Love that rolling road...did you make it yourself or commercial piece. Sure works well...love to see how it's put together. I have tried a couple of versions of rolling road, but they did not turn out as well as yours.
Rog
-
My Case wannabe
Still teasing me with that one ;)
-
Here's one that's no longer with me. Needed a good polish but still had lacquer on it, so I found it easier to sell on eBay and ended up sending it to Australia
(https://live.staticflickr.com/65535/48304669267_1e3c3d00cb_b.jpg)
(https://live.staticflickr.com/65535/48304669177_a9dbca9ff1_b.jpg)
-
I do rather like how the drive band goes neatly through the fender Nick.
I just hope I don't get my leg wrapped up in it ;)
-
I do rather like how the drive band goes neatly through the fender Nick.
-
My Case wannabe,:
Hm. No picture.
[attachimg=2]
-
(https://live.staticflickr.com/65535/48136350837_9f87aa2cb1_b.jpg)
(https://live.staticflickr.com/65535/48136256991_79d28da71b_b.jpg)
-
Thanks Bruce! My only complaint is how heavy it is!! :D
No problem Nick, I'll help you lift it....right into my vehicle...lol

-
Thanks Bruce! My only complaint is how heavy it is!! :D
No problem Nick, I'll help you lift it....right into my vehicle...lol
-
My ADE from David Hart (his picture)
(https://live.staticflickr.com/65535/48304464977_2955a08e6f_b.jpg)
-
Thanks Bruce! My only complaint is how heavy it is!! :D
-
oohwee Nick, that sure is one purty Case engine....Woweeee.
-
(https://live.staticflickr.com/65535/48303884372_98281ab6ec_b.jpg)
-
One of my rollers. A David Auld.[attachimg=1]
-
What make/model is this one?
Hi Dave, I do not know a model number for this one, but it is made by HA-MOBIL
-
Thank you again Charlie ;)
(https://live.staticflickr.com/7855/32497169867_e489d2f923_b.jpg)
Hey Nick,
What make/model is this one?
-
Just two Beauties Roy! 8)
-
Just two of many
-
Thank you again Charlie ;)
(https://live.staticflickr.com/7855/32497169867_e489d2f923_b.jpg)
(https://live.staticflickr.com/7805/40473096253_2e626eeb0b_b.jpg)
-
[attachimg=1]
-
What make and scale is the Case? Looks Accucraftish. Very professional looking driver!
1" Maxitrak Case 80 HP with our own St. Paul Steam at the throttle :D
-
The new(wish) Maxitrak Sentinel DG6:
https://www.accucraftestore.com/road-sentinel
Kind of cool.
https://www.youtube.com/watch?v=Vdz1cX_whnQ
-
Here is my TE1a that my wife bought one year for Christmas.
[attachimg=1]
Front of box.
[attachimg=2]
-
Thanks Bruce! I have my eye on the D310. Any issues with yours? Is it running using tablets or a gas burner?
this video should explain a lot for you, yes, I use a gas burner setup from Forest classics 026 I believe, the biggest fault is the factory drive system....it slips a lot
https://youtu.be/3_ei7vmOHfc
here is another video with most mods done....
https://youtu.be/2G8XzNpu2wI
-
Thanks Bruce! I have my eye on the D310. Any issues with yours? Is it running using tablets or a gas burner?
-
Well....you asked....
https://youtu.be/i0gcDr7lXEI
https://youtu.be/OtQf9xIKdCk
https://youtu.be/NUJoAVbkgTI
https://youtu.be/l0cPt3PVnvA
https://youtu.be/vvr2V4yTpxk
https://youtu.be/UmN4qhGLpAw
I have plenty more, but this will do for now.
-
Jersey Steam asked about my Mamod Double Traction. It's inspired by the Lansing Double Traction engine.
https://youtu.be/HQyxeTAP7Is
https://youtu.be/A0sC1KqHx44
https://youtu.be/1r9EQMkAJBw
The finished product:
https://youtu.be/_aR3gPMl1gE
:)
-
https://youtu.be/LdK2ZPvHYSk
-
;D :D ;D
(https://live.staticflickr.com/4902/46307785621_e3c98d76e5_b.jpg)
now that's funny, that fellow is going to get coal ash on that fine coat.
-
What make and scale is the Case? Looks Accucraftish. Very professional looking driver!
-
;D :D ;D
(https://live.staticflickr.com/4902/46307785621_e3c98d76e5_b.jpg)
-
(https://live.staticflickr.com/7895/40389938893_ae9862d556_b.jpg)
qwertyuiop
-
You don't fool around! All very nice! Is the 4WD Mamod your creation?
-
Wilesco Locomobile:
https://youtu.be/PHXjwvqtotw
Märklin Locomobile:
https://youtu.be/pm06e3V6I2w
Märklinhouse:
https://youtu.be/cQEUiZMgufs
Https://youtu.be/S2-R8422yZ0
Https://youtu.be/_VJ4NhUQ3f8
Mamod TE:
https://youtu.be/4cXrFXUKQRE
https://youtu.be/_aR3gPMl1gE
Mamod Foden:
https://youtu.be/63XHyCaVeGw
-
Any make, model or size!