Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines

The Regular Stuff: Chat, Buy, Sell, Off Topic, etc. => Classifieds - For Sale => Topic started by: steamer85 on August 04, 2019, 08:25:09 am

Title: Re: Steam engines gas burner!
Post by: Nick on August 05, 2019, 07:23:51 pm

Good to hear. I will let you know some common vertical firebox opening measurements...

Title: Re: Steam engines gas burner!
Post by: steamer85 on August 05, 2019, 02:17:43 pm

Quote from: Nick on August 04, 2019, 02:23:49 pm

Any plans to make a small/short round burner for vertical boilers? Have yet to find a good supplier... the BIX ones are to tall and the ceramic hits the top of the firebox opening.

(https://www.forest-classics.co.uk/itemimages/5503559/Bix-003-11-2-Round-Burner_T_1_D_1606_I_731_G_0_V_1[sellr]1372x1098[sellr].JPG)

I plan to have round burners in the near future, i will keep on mind to make them more short when it comes to that.

Title: Re: Steam engines gas burner!
Post by: St Paul Steam on August 04, 2019, 07:39:01 pm

ingenious design, wonderful execution...well done.

Title: Re: Steam engines gas burner!
Post by: Nick on August 04, 2019, 02:23:49 pm

Any plans to make a small/short round burner for vertical boilers? Have yet to find a good supplier... the BIX ones are to tall and the ceramic hits the top of the firebox opening.

(https://www.forest-classics.co.uk/itemimages/5503559/Bix-003-11-2-Round-Burner_T_1_D_1606_I_731_G_0_V_1[sellr]1372x1098[sellr].JPG)

Title: Re: Steam engines gas burner!
Post by: steamer85 on August 04, 2019, 09:57:57 am

Thank you. I've posted just ebay link instead price. I will edit my post

Title: Re: Steam engines gas burner!
Post by: Steamloco on August 04, 2019, 08:52:43 am

Is there a price?

Welcome to the forum BTW!

Title: Steam engines gas burner!
Post by: steamer85 on August 04, 2019, 08:25:09 am

Affordable alternative to the expensive ceramic gas burners.This listing is only for the burner with gas jet instaled. In order to work you will need gas hose with 5mm inner diameter, and also gas regulator valve for your own gas tank. Gas jet nozzle is 0.2mm, you can easily screw it in or out inside venturi, to set the right air-fuel mixture, after that you just lock it with locking nut on the top of venturi.
The black venturi handle is made from Teflon with 25% Graphite and able to withstand very high temperatures.Two side holes should newer be covered, they serve to supply the burner with air!
35$, check link
https://www.ebay.com/usr/green_engine
https://www.youtube.com/watch?v=wXNP01bICy8