Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines

Builds, Repairs, Show Your Machines! => Collections & Pictures => Topic started by: Nick on January 26, 2020, 09:38:25 am

Title: Re: Weldon/Monarch
Post by: txlabman on January 26, 2020, 10:52:25 pm

Very nice Nick.

Congrats!

Title: Re: Weldon/Monarch
Post by: Nick on January 26, 2020, 10:09:00 am

Quote from: Scorpion2nz on January 26, 2020, 10:03:20 am

Yours had a SV ?  Then it is a Weldon
Should be no exhaust line and no regulator , chimney should short and fat .

Cheers
Dennis

Thanks for clearing that up Dennis!

It is nice having the regulator so I will probably keep it... The top of the boiler is full of dents, so this one is far from perfect.

This one has travelled the world, I bought it from a friend in the UK

Title: Re: Weldon/Monarch
Post by: Scorpion2nz on January 26, 2020, 10:03:20 am

Yours had a SV ?  Then it is a Weldon
Should be no exhaust line and no regulator , chimney should short and fat .

Cheers
Dennis

Title: Weldon/Monarch
Post by: Nick on January 26, 2020, 09:38:25 am

Here's one that my knowledge is really lacking on... Seen these listed as both Weldon and Stewart Monarch...

These are quite large and heavy for a toy steamer. I am not sure about the exhaust line or the throttle on the steam line... And the chimney looks much taller than others I have seen...

(https://www.officeofsteamforum.com/gallery/officeofsteamforum/0/6-250120225512-385443.jpeg)

(https://www.officeofsteamforum.com/gallery/officeofsteamforum/0/6-250120225514-3861140.jpeg)

(https://www.officeofsteamforum.com/gallery/officeofsteamforum/0/6-250120225522-390832.jpeg)

(https://www.officeofsteamforum.com/gallery/officeofsteamforum/0/6-250120225516-387544.jpeg)

(https://www.officeofsteamforum.com/gallery/officeofsteamforum/0/6-250120225518-3882106.jpeg)

(https://www.officeofsteamforum.com/gallery/officeofsteamforum/0/6-250120225520-3891309.jpeg)

(https://www.officeofsteamforum.com/gallery/officeofsteamforum/0/6-250120225524-3911929.jpeg)