Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines

Office of Steam ~GLOBAL POWER-UP~ virtual engine show => ENGINEERS HALL at Our First Global Power-Up => Topic started by: Steam Technology on February 28, 2020, 01:38:49 am

Title: Re: Steam Technology and Pressure Valve's Table *** NEW EXHIBIT***
Post by: Steam Technology on March 02, 2020, 03:30:54 pm

Thank you all for looking and for the comments.

Title: Re: Steam Technology and Pressure Valve's Table *** NEW EXHIBIT***
Post by: AirSpyder on March 01, 2020, 09:52:44 am

Very nice,
I like them all.

Title: Re: Steam Technology and Pressure Valve's Table *** NEW EXHIBIT***
Post by: Dr.Rev.DelmarMacReady on March 01, 2020, 09:17:06 am

Cool, I didn't think about running these low temp stirling on an ice pack. Thanks for the idea, and the video!

Title: Re: Steam Technology and Pressure Valve's Table *** NEW EXHIBIT***
Post by: St Paul Steam on March 01, 2020, 07:11:30 am

Nice, thanks for participating.

Title: Re: Steam Technology and Pressure Valve's Table *** NEW EXHIBIT***
Post by: Nick on March 01, 2020, 01:07:49 am

Looks great running at the slower speed. I could always send you some of our "free snow" before it melts for the year  :D

Title: Re: Steam Technology and Pressure Valve's Table ***NEW EXHIBIT***
Post by: Steam Technology on February 29, 2020, 08:38:05 pm

LTD Stirling running on ice. One of my favourite engines running one of my fa ourite ways.
It always makes me think of free energy, it will run on that one ice gelpack for 6 or 7 hours.

https://youtu.be/A5QvWQM8JEw

It is a little slow today as it is only 35C today, when the weather is hotter it runs faster.

Title: Re: Steam Technology and Pressure Valve's Table
Post by: Steam Technology on February 29, 2020, 03:57:19 pm

yes the twin stirling has good power, it surprised me.

@Scorpion2nz is the goto guru on Auld, in fact on all NZ engines.

[attachimg=1]

A side view of Jacks engine taken a few years ago so please forgive the poor quality

Title: Re: Steam Technology and Pressure Valve's Table
Post by: SeeSteam on February 29, 2020, 08:17:24 am

Any side pictures of the TE? So far it's a teaser video :)

The twin cylinder puts out good power. :)

Title: Re: Steam Technology and Pressure Valve's Table
Post by: Stoker on February 28, 2020, 08:40:57 pm

Thanks Dave .... all looks good from here!

ENCORE Please!!!

Title: Re: Steam Technology and Pressure Valve's Table
Post by: Steam Technology on February 28, 2020, 02:56:28 pm

Thanks Guys.
The TE vid was taken a few years back, we will have to get another when time permits.

Title: Re: Steam Technology and Pressure Valve's Table
Post by: Nick on February 28, 2020, 08:18:49 am

Love the David Auld, but now we need a longer video of it  ;)

Title: Re: Steam Technology and Pressure Valve's Table
Post by: jkbixby on February 28, 2020, 07:40:17 am

The twin Stirling with generator is a good looking engine, inexpensive or not - and the flame gulpers are great......thanks for showing them.

Title: Re: Steam Technology and Pressure Valve's Table
Post by: txlabman on February 28, 2020, 07:21:41 am

A very nice selections of Engines Dave.

I am particularly fond of the Flame Licker.

I had not seen a David Auld Traction Engine. I still need to go back and read the Linked Thread.

Thank you for participating in GPU 2020. 🤠

Title: Re: Steam Technology and Pressure Valve's Table
Post by: RedRyder on February 28, 2020, 06:06:17 am

Thanks, gents! Looks like great fun!


Gil

Title: Steam Technology and Pressure Valve's Table *** NEW EXHIBIT***
Post by: Steam Technology on February 28, 2020, 01:38:49 am

First off two recent additions to my collection,

https://youtu.be/3b5GhT25VmA

A twin stirling with a generator wnich was fairly cheap.

https://youtu.be/K7A-5myWaEU

This flame eater has been on my bucket list for a while

https://youtu.be/NrlGiw_khX0

A new and bigger burner makes it run better and longer. Most flme eaters suffer from running probs but this one runs really well.

https://youtu.be/YN-Xg_rWZRs

And finally Jack's Auld Replica. See link below for more details.

https://www.tapatalk.com/groups/modelandtoysteamforum/auld-replica-te-t1686-s10.html

Hope you enjoy our table and have a good look around at everyone elsess table as well.