Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines

Office of Steam ~GLOBAL POWER-UP~ virtual engine show => ENGINEERS HALL at Our First Global Power-Up => Topic started by: AirSpyder on February 29, 2020, 10:25:50 am

Title: Re: Bill's table
Post by: Nick on March 01, 2020, 11:30:52 pm

Quote from: txlabman on March 01, 2020, 06:10:40 pm

The Atomic is fantastic!

Best video of GPU 2020!

👏👏👏👏👏

Yes! If anyone has not seen this video, they need to watch it, Love the beginning!!  8)

Title: Re: Bill's table
Post by: Stoker on March 01, 2020, 07:51:57 pm

Great table Bill ... very enjoyable!

That fourth coach behind the William tamed it perfectly ... I could watch that make laps all day long!!!

Title: Re: Bill's table
Post by: Woe is me on March 01, 2020, 06:22:42 pm

You have some great ideas Bill, and you know how to execute those ideas. Great job, great table.

Title: Re: Bill's table
Post by: txlabman on March 01, 2020, 06:10:40 pm

The Atomic is fantastic!

Best video of GPU 2020!

👏👏👏👏👏

Title: Re: Bill's table
Post by: AirSpyder on March 01, 2020, 03:22:30 pm

Here's a short video of my Bohm Rocket going, the wife was making noise in the kitchen. :)

https://youtu.be/_cyR8u4xEI0

Title: Re: Bill's table
Post by: AirSpyder on March 01, 2020, 10:17:23 am

And the "Atomic" for anyone who hasn't seen it.

[attachimg=1]

An older video

https://youtu.be/kQ8QKXvYfeY

Title: Re: Bill's table
Post by: AirSpyder on March 01, 2020, 10:08:04 am

Here are some other non steam engines.

[attachimg=1]

Title: Re: Bill's table
Post by: AirSpyder on March 01, 2020, 10:06:24 am

All of the locos are great runners too, the M.S.S. and the SE1 have been fine tuned with some careful lapping and the William has had a new burner to make it right. the Accucraft Dora and Wuhu have been great engines from the start, I have a Ruby somewhere, I guess I forgot to post that. :)
That's a runner too.

Title: Re: Bill's table
Post by: Dr.Rev.DelmarMacReady on March 01, 2020, 09:31:53 am

Sweet locos...I really like the Falk, that is one I haven't seen before. Love the layout.

Title: Re: Bill's table
Post by: Mi Steam on March 01, 2020, 09:23:10 am

Bill, I like the Weeden workshop and your locos look great.

Title: Re: Bill's table
Post by: Woe is me on February 29, 2020, 07:46:01 pm

I really like that WUHU Falk, and the Brunel is cool to.

Title: Re: Bill's table
Post by: jkbixby on February 29, 2020, 06:20:02 pm

Lots of great locos Bill and a good looking outdoor layout - well done!

Title: Re: Bill's table
Post by: AirSpyder on February 29, 2020, 04:06:59 pm

Thanks everyone, how about a couple of locos.

WuHU Falk

[attachimg=1]

Accucraft Dora

[attachimg=2]

Mamod Brunel

[attachimg=3]

Mamod SE1[attachimg=4]

Mamod William

[attachimg=5]

William Video

https://youtu.be/v_Q1ccxc140

Title: Re: Bill's table
Post by: Woe is me on February 29, 2020, 03:57:31 pm

Hey Bill, like everyone else say's that Weeden looks new with a killer paint job, good choice.
I wish I would have grabbed one of those D 15 with tile looking base. Well done on choosing what to put on the table.

Title: Re: Bill's table
Post by: Dr.Rev.DelmarMacReady on February 29, 2020, 03:38:02 pm

Nicely modded wilesco, and I also like the Weeden sprayed to match the workshop. They look swell together

Title: Re: Bill's table
Post by: AirSpyder on February 29, 2020, 03:29:22 pm

Quote from: Nick on February 29, 2020, 11:44:47 am

Love that modified Weeden made to match the workshop  8)  and was that Mamod a custom order? or something they made for a limited time?

Quote

Remote controlled Hotrod

I believe I remember a V-twin car out in your workshop from my visit 3 years ago... is that still a work in progress?

And thanks for participating!  :)

The car had a Saito v4 in it, a three wheeler, and still a work in progress.

Title: Re: Bill's table
Post by: jkbixby on February 29, 2020, 02:20:24 pm

A nice few examples from your collection Bill - I like your own creations especially the paddlewheel boat.

Title: Re: Bill's table
Post by: txlabman on February 29, 2020, 01:04:26 pm

A  well executed restoration of a neat workshop.

Thanks for including with your Table.

Title: Re: Bill's table
Post by: AirSpyder on February 29, 2020, 11:53:27 am

I think I got one of the first Mamod Beams produced, I pre-ordered it when it was announced.
The larger flywheel is one that I made for it because I thought the engine looked too plain.

Here's another little workshop resto, this one is electric.

New pulleys and paint for this one, it was pretty rough

[attachimg=1]

https://youtu.be/FdiociGtSTg

Title: Re: Bill's table
Post by: Nick on February 29, 2020, 11:44:47 am

Love that modified Weeden made to match the workshop  8)  and was that Mamod a custom order? or something they made for a limited time?

Quote

Remote controlled Hotrod

I believe I remember a V-twin car out in your workshop from my visit 3 years ago... is that still a work in progress?

And thanks for participating!  :)

Title: Re: Bill's table
Post by: txlabman on February 29, 2020, 11:23:24 am

Very nice. Love those Weeden’s....even if they frustrate the crap out of me. 🤠

Title: Re: Bill's table
Post by: AirSpyder on February 29, 2020, 11:21:09 am

Thanks guys, Here is my slightly modified Weeden 44 and Weeden workshop

[attachimg=1]

Video

https://youtu.be/u63vUuRrGYY

Title: Re: Bill's table
Post by: txlabman on February 29, 2020, 11:06:55 am

Great presentation Bill.

I am particularly smitten with your Wilesco Mods. 

Your matching bases on the Graham Industries engines are also really nice.

Thank you for participating in GPU 2020. 🤠

Title: Re: Bill's table
Post by: RedRyder on February 29, 2020, 10:48:46 am

Hi Bill, No apologies expected or required.
All your content is great to see and is welcome here!

Title: Re: Bill's table
Post by: Stoker on February 29, 2020, 10:43:52 am

Off to a grand start here Bill ...... I want MORE PLEASE!!!

Title: Bill's table
Post by: AirSpyder on February 29, 2020, 10:25:50 am

Greetings,
My apologies for the last minute effort on my part.

I guess my theme is dig out a few things I haven't seen for a while, sorry no time for polishing off the patina and grime. :)

Here is one of my favorite Wilescos, D15.

[attachimg=1]

The Graham family

[attachimg=2]

Miss Portland

[attachimg=3]

Mamod SP8 with fancy Flywheel

[attachimg=4]

And a couple of my own creations using Wilesco D48s

Remote controlled Hotrod

[attachimg=5]

Remote controlled Paddle boat

[attachimg=6]

[attachimg=7]