Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines

Builds, Repairs, Show Your Machines! => Videos The Office of Steam Cinema => Topic started by: St Paul Steam on March 21, 2020, 09:34:28 pm

Title: Re: Another M91....with a twist.
Post by: Roscoe on March 22, 2020, 09:36:21 am

Looks great with all the “BLING” Bruce,👍😎

Title: Re: Another M91....with a twist.
Post by: St Paul Steam on March 22, 2020, 08:15:10 am

Quote from: Nick on March 22, 2020, 08:05:40 am

You've done it again Bruce!! That is Beautiful  8) 8)

By the way, I have just realized mine is still sealed in the shipping box...

I found out its a good idea to wrap a rubber band around the battery box a few times, the only problem I've had thus far is the middle battery got enough dislodged from its holder to make it quit running, but still have enough connection to give an occasional spark when trying to restart it.

Title: Re: Another M91....with a twist.
Post by: Nick on March 22, 2020, 08:05:40 am

You've done it again Bruce!! That is Beautiful  8) 8)

By the way, I have just realized mine is still sealed in the shipping box...

Title: Re: Another M91....with a twist.
Post by: St Paul Steam on March 22, 2020, 08:03:23 am

I intend (somewhere down the line) to give it a proper base/mount.

Title: Re: Another M91....with a twist.
Post by: St Paul Steam on March 22, 2020, 07:55:23 am

Quote from: RedRyder on March 22, 2020, 07:08:29 am

Nice work, Bruce!


Looks like it was just returned from Orange County Choppers!

now that's funny !

Title: Re: Another M91....with a twist.
Post by: St Paul Steam on March 22, 2020, 07:54:58 am

Quote from: txlabman on March 22, 2020, 05:57:14 am

Great job Bruce!

It never occurred to me to nickel plate one.

I think you may have started a new trend. 🤠

Thanks Charlie , it took me several hours to clean out all the nickel plating gunk from the tubing & radiator & polish all those hard to reach spots again, & then reassemble everything. but it came out as I hoped it would & was worth the effort.

Title: Re: Another M91....with a twist.
Post by: St Paul Steam on March 22, 2020, 07:51:27 am

Quote from: Raphael on March 22, 2020, 04:06:23 am

Bonjour Bruce,
As I have the same one, I can compare and congratulate you, this enhancement really is worth it.
Your engine seems to be slower than mine, did you change somethong ? The springs ?

Thanks Raphael, its pretty much as it came out of the box right here at this point ,several forum members have had many suggestions on how to make them run slower which I will implement.

Title: Re: Another M91....with a twist.
Post by: RedRyder on March 22, 2020, 07:08:29 am

Nice work, Bruce!


Looks like it was just returned from Orange County Choppers!

Title: Re: Another M91....with a twist.
Post by: txlabman on March 22, 2020, 05:57:14 am

Great job Bruce!

It never occurred to me to nickel plate one.

I think you may have started a new trend. 🤠

Title: Re: Another M91....with a twist.
Post by: classixs on March 22, 2020, 04:47:55 am

M91 De Luxe (https://emoji.tapatalk-cdn.com/emoji7.png)(https://emoji.tapatalk-cdn.com/emoji7.png)(https://emoji.tapatalk-cdn.com/emoji7.png)

Looks amazing, well done Bruce !!!

Title: Re: Another M91....with a twist.
Post by: Raphael on March 22, 2020, 04:06:23 am

Bonjour Bruce,
As I have the same one, I can compare and congratulate you, this enhancement really is worth it.
Your engine seems to be slower than mine, did you change somethong ? The springs ?

Title: Re: Another M91....with a twist.
Post by: Stoker on March 21, 2020, 11:43:17 pm

Nice treatment .... very eye catching, and it runs well too boot!

Title: Another M91....with a twist.
Post by: St Paul Steam on March 21, 2020, 09:34:28 pm

got this a few months ago, just got my parts back from the nickel plater & re-installed.
pleaase enjoy....

https://youtu.be/Jhvt9E_QMO8