Post by: RedRyder on May 03, 2020, 08:55:19 pm
I posted the clean up here....
https://www.officeofsteamforum.com/restorations/1963-jensen-50-clean-up-(the-one-from-mr-tom)/msg24836/?topicseen#msg24836
Post by: Steam Technology on May 03, 2020, 06:11:52 pm
Post by: Mr. Tom on May 03, 2020, 04:53:19 am
Post by: RedRyder on May 02, 2020, 07:36:50 pm
Mr. Tom, On behalf of my friend, Bill, thank you very much for the superb packing job..!!!
Gil
Post by: RedRyder on April 25, 2020, 07:43:39 pm
Post by: Nick on April 25, 2020, 07:40:37 pm
Nick the size of your rig is very impressive.
I notice it inhales the entire top of your picnic table.!
Haha, yes, but it's a kid's picnic table
(https://www.officeofsteamforum.com/gallery/officeofsteamforum/0/6-250420193900-7901888.jpeg)
Post by: RedRyder on April 25, 2020, 07:33:59 pm
I notice it inhales the entire top of your picnic table.!
Post by: RedRyder on April 25, 2020, 07:27:50 pm
I was all tempted to bid more for this one to. Now that it's sold I'll point out something that really stands out but often overlooked. I think Gil has aquired a very interesting year 50 here. Personally I can't recall seeing an angled sight glass #50 boiler on a brick firebox. Hopefully you can procure a brick smokestack base. I think its a very nice engine and one not often seen.
Kudos to all. Thanks Tom and congrats Gil and buyer.
Thanks, Jack. I don't know for sure which way this project will go until it gets here and I have had time to scare up a few parts and look it over up close.
In the early 1960's the fireboxes were brick and the boilers retained the slanted tube site glass into the mid 60's or later. It was sometime between 1965 and 1968 that the 3 round windows found their way into production.
Post by: SEUSA on April 25, 2020, 07:22:40 pm
You two can do some horse trading.. lol
That's awesome
Post by: Nick on April 25, 2020, 06:51:21 pm
I was all tempted to bid more for this one to. Now that it's sold I'll point out something that really stands out but often overlooked. I think Gil has aquired a very interesting year 50 here. Personally I can't recall seeing an angled sight glass #50 boiler on a brick firebox. Hopefully you can procure a brick smokestack base. I think its a very nice engine and one not often seen.
Kudos to all. Thanks Tom and congrats Gil and buyer.
I assume this 50 of mine with angled sight glass came on a brick firebox given the brick smokestack base, but it has darker blue engine base.
(https://www.officeofsteamforum.com/gallery/officeofsteamforum/0/6-250420184925-7891331.jpeg)
Post by: SEUSA on April 25, 2020, 06:12:33 pm
Kudos to all. Thanks Tom and congrats Gil and buyer.
Post by: SEUSA on April 25, 2020, 06:01:53 pm
That would be a perfect base for one of those riveted boilers you have. Will you drop one on it or just restore it back to original shape?
Post by: RedRyder on April 25, 2020, 03:02:31 pm
We are with you on "stay Safe" above all.
Gil
Post by: Mr. Tom on April 25, 2020, 03:01:01 pm
Post by: RedRyder on April 24, 2020, 03:49:23 pm
Post by: Mr. Tom on April 24, 2020, 03:14:08 pm
I’ll finalize the sale around 3:00 p.m. tomorrow 4/25/2020. Don’t wait till the last minute, I may not see your offer!
Don’t miss this opportunity to acquire a sought after engine. These don’t change hands that often- previous owner kept this one for over 40 years! Thanks. Mr. Tom
Post by: RedRyder on April 21, 2020, 09:38:07 am
Post by: Cedge on April 19, 2020, 02:20:56 pm
Other than being afflicted with cabin fever, we' all seem to be weathering things relatively well, with our current restrictions taken into consideration. Jensen is no stranger to surviving extreme hard times, so don't be too quick to count us out. Luckily, we are able to scale operations with some significant flexibility, although the current situation is unprecedented. Our major concern these days is for our loyal fans who might not be in any position to support us with new orders, once we're allowed to reopen. We worry about you guys, just as you worry about our well being. Funny how that relationship works... eh?
Steve
Post by: Mr. Tom on April 19, 2020, 08:20:59 am
Post by: Mr. Tom on April 19, 2020, 07:18:20 am
Post by: Maxwell on April 19, 2020, 07:09:06 am
My bid $2550
Post by: SEUSA on April 19, 2020, 04:40:38 am
Post by: St Paul Steam on April 18, 2020, 07:26:57 pm
Great! I am happy to kickoff the official bidding at $2,000.00I see your $2000, & raise you to $2100 ;)
https://youtu.be/BmlnltVzksg
Post by: steamerado on April 18, 2020, 06:51:04 pm
Post by: Mr. Tom on April 18, 2020, 05:25:25 pm
Having a feed pump and tank really increases the fun factor and allows for longer run times. Happy bidding!
Post by: steamerado on April 18, 2020, 05:13:21 pm
Post by: RedRyder on April 18, 2020, 03:38:02 pm
Hi Tom, Great to see your Jensen #50 listed for sale here!
Gil
Post by: St Paul Steam on April 14, 2020, 09:08:26 pm
Those were the days!Whew. I wish those prices were good today 😉👍
Post by: Nick on April 14, 2020, 06:36:44 pm
Post by: Mr. Tom on April 14, 2020, 06:02:14 pm
Post by: Nick on April 14, 2020, 05:35:51 pm
Post by: Mr. Tom on April 14, 2020, 02:22:12 pm
Pic#1 Extraneous nail holes in plywood base. Plating on feed pump priming plug worn. Dark spot on cast iron engine base appears to be worn paint.
Pic#2 Discoloration of paint on cast iron appears to be steam oil. I have never attempted a thorough cleaning or polishing, only a wipe down. Original chimney mount is missing. Shown is an expedient mount made by me. Fire box is discolored due to previous owner experimenting with propane firing.
Pic#3 Combustion air inlets courtesy of previous owner. Cords are new retro-look. Heating elements are new 500 watt each.
Pic #4 Two extraneous holes in fire box. Whistle handle has a small melty spot. Gauge face is slightly discolored due to steam condensation.
Pic #5 Some stray green paint on edge of plywood. A little grime on generator base and lamp post.
Pic#6 Some new parts straight from Jensen. Hayco restraints, complete gasket set, sight glass tube and gaskets with handwritten instructions, new style pressure gauge, whistle handle (wooden and slightly larger than original).
Pic#7 Labels indicating chain of ownership. Vintage photo of this engine circa 1975 at full steam, powering a table full of accessories via jack shaft and leather belts.
Pic #8 A little Jensen ephemera 1950s - 1980s.
This Jensen 50 is a joy to own and operate as is. This may be an opportunity to acquire a sought after engine at a price discounted due to cosmetics. Thanks for looking.
Post by: steamerado on April 14, 2020, 09:26:03 am
Post by: St Paul Steam on April 13, 2020, 09:30:28 pm
So many have cut back on purchasing anything right now.Still plenty of buyers for the right steam engine....a Jensen #50 qualifies as the "right" steam engine, he will have no problem selling this when he's ready. ;)
Post by: SeeSteam on April 13, 2020, 08:50:16 pm
We really need to rush those vaccines...
Post by: RedRyder on April 13, 2020, 06:47:45 pm
Lets clear this up right now.Great to know that they will be still in business. I hope that they get some of the feds stimulus money for small business to help too
Jensen is not closed for good.
They will re-open when the rest of PA goes back to work.
Dorita will take orders now.
They will be filled on reopening.
This thread has her phone for order placement.
https://www.officeofsteamforum.com/general-discussion/while-jensen-is-closed-for-health-you-can-call-in-orders-for-fulfillment-on-re-o/
Gil
They are fully aware of all that is available.
Post by: BBToyz on April 13, 2020, 05:40:13 pm
Lets clear this up right now.Great to know that they will be still in business. I hope that they get some of the feds stimulus money for small business to help too
Jensen is not closed for good.
They will re-open when the rest of PA goes back to work.
Dorita will take orders now.
They will be filled on reopening.
This thread has her phone for order placement.
https://www.officeofsteamforum.com/general-discussion/while-jensen-is-closed-for-health-you-can-call-in-orders-for-fulfillment-on-re-o/
Gil
Post by: Mr. Tom on April 13, 2020, 05:21:05 pm
Post by: RedRyder on April 13, 2020, 05:09:37 pm
Jensen is not closed for good.
They will re-open when the rest of PA goes back to work.
Dorita will take orders now.
They will be filled on reopening.
This thread has her phone for order placement.
https://www.officeofsteamforum.com/general-discussion/while-jensen-is-closed-for-health-you-can-call-in-orders-for-fulfillment-on-re-o/
Gil
Post by: Mr. Tom on April 13, 2020, 07:42:02 am
Thanks everyone for your input so far!
Post by: BBToyz on April 13, 2020, 06:14:00 am
Post by: St Paul Steam on April 13, 2020, 05:41:17 am
Post by: Steamandoil (Tim) on April 12, 2020, 08:38:09 pm
Post by: SEUSA on April 12, 2020, 08:29:47 pm
Post by: Nick on April 12, 2020, 05:33:06 pm
Post by: Mr. Tom on April 12, 2020, 05:27:32 pm