Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines

Builds, Repairs, Show Your Machines! => Technical Tips, Builds, and Help => Topic started by: Belugawhaleman on May 04, 2020, 03:21:05 pm

Title: Re: Stainless hex screws
Post by: Belugawhaleman on May 10, 2020, 09:01:32 pm

Thanks for the replies :)

I know these pmr generators are used by a lot of steam guys on this forum and any way to dress
them up might be welcome info. I was thinking of plating the hardware on my generator as my next
Covid project.

Title: Re: Stainless hex screws
Post by: St Paul Steam on May 10, 2020, 07:49:24 pm

Good info, & not bad priced either. thanks Paul.

Title: Re: Stainless hex screws
Post by: oilfield_steam on May 10, 2020, 07:23:50 pm

Whaddaya know.  We have a compressor station outside of Shermans Dale.  Never been there, but I might need to find a reason to go... after covid that is.  Thanks Paul.

Title: Re: Stainless hex screws
Post by: krypto31337 on May 04, 2020, 06:28:06 pm

Well, I driven through Shermans Dale many times but would have never imagined there was a local shop producing model steam items.

Title: Stainless hex screws
Post by: Belugawhaleman on May 04, 2020, 03:21:05 pm

I'd been looking for some #3-48 screws for my PMR generator for some time.
I wanted them in stainless and with hex heads. Not easy to find scale-looking hex head
screws in this size screw, but I finally found some. They can be found on this website along with other things.
Here's a link:


https://godshallscustommachining.com

[attachimg=1][attachimg=2]