Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines

Builds, Repairs, Show Your Machines! => Technical Tips, Builds, and Help => Topic started by: steam 4301 on March 11, 2019, 05:17:22 pm

Title: Re: P 60 Governor
Post by: steam 4301 on March 13, 2019, 03:59:17 pm

I tried that. There is a collar on the rod under the nut that I cant get off. Any ideas ?
Thanks Brian

Title: Re: P 60 Governor
Post by: St Paul Steam on March 13, 2019, 05:52:09 am

Quote from: steam 4301 on March 11, 2019, 05:17:22 pm

I have a p 60 governor from Microcosm that I need to get the spring off to put a softer one on . Has any one done this ? I tried but could not get it apart. Any help would be great. Thanks.

remove the nut from the top & then 3 retaining clips from either the top or bottom set of flyball arms.

Title: Re: P 60 Governor
Post by: Gearhead Jed on March 11, 2019, 05:34:34 pm

I wonder if there is loctite holdingbit somewhere?

Title: P 60 Governor
Post by: steam 4301 on March 11, 2019, 05:17:22 pm

I have a p 60 governor from Microcosm that I need to get the spring off to put a softer one on . Has any one done this ? I tried but could not get it apart. Any help would be great. Thanks.