Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines

Builds, Repairs, Show Your Machines! => Videos The Office of Steam Cinema => Topic started by: Jim on August 26, 2020, 01:29:56 am

Title: Re: Twin MSM Pevensey single cylinder horizontal mill engines
Post by: Jim on August 29, 2020, 11:41:57 pm
Another enjoyable video of some very nice pieces  8)  Felt like I was there in person. I liked the included footage of the chuff pot spitting everywhere and the phone message  ;) :D

Thanks Nick, appreciate you looking and the comment :)
Title: Re: Twin MSM Pevensey single cylinder horizontal mill engines
Post by: Nick on August 29, 2020, 10:32:21 pm
Another enjoyable video of some very nice pieces  8)  Felt like I was there in person. I liked the included footage of the chuff pot spitting everywhere and the phone message  ;) :D
Title: Re: Twin MSM Pevensey single cylinder horizontal mill engines
Post by: Jim on August 29, 2020, 06:15:29 pm
Yes Gil, its not a plant. These are orphans and its easy to build up a temporary 'plant' I've made them all modular so to speak.

How did you go on the East Coast with the storm that hit the US, were you far enough North to not be affected?

Hi Jim, August 4th out power went down 6 days as 70 mph winds, a couple tornadoes, and rain did it's job. 3 of 4 roads leaving our neighborhood were impassable from downed trees and power lines.

Right now we have a lot of rain overnight and through the next day from the remnants of Hurricane Laura. This is the one that hit the Lake Charles, Louisiana and Port Arthur, Texas areas as a category 4 storm with 150 mph winds at landfall. While we are getting the rain and a few thunder storms, the wind here today is quite gentle.

Gil

That's great to read Gil, so glad you didn't get hit hard again.
Title: Re: Twin MSM Pevensey single cylinder horizontal mill engines
Post by: Jim on August 29, 2020, 06:14:39 pm
I love everything about that settup Jim, envious of that nice big 4" boiler.

Thanks for watching and the comment Bruce.
Title: Re: Twin MSM Pevensey single cylinder horizontal mill engines
Post by: RedRyder on August 29, 2020, 10:25:59 am
Yes Gil, its not a plant. These are orphans and its easy to build up a temporary 'plant' I've made them all modular so to speak.

How did you go on the East Coast with the storm that hit the US, were you far enough North to not be affected?

Hi Jim, August 4th out power went down 6 days as 70 mph winds, a couple tornadoes, and rain did it's job. 3 of 4 roads leaving our neighborhood were impassable from downed trees and power lines.

Right now we have a lot of rain overnight and through the next day from the remnants of Hurricane Laura. This is the one that hit the Lake Charles, Louisiana and Port Arthur, Texas areas as a category 4 storm with 150 mph winds at landfall. While we are getting the rain and a few thunder storms, the wind here today is quite gentle.

Gil
Title: Re: Twin MSM Pevensey single cylinder horizontal mill engines
Post by: St Paul Steam on August 29, 2020, 06:13:00 am
I love everything about that settup Jim, envious of that nice big 4" boiler.
Title: Re: Twin MSM Pevensey single cylinder horizontal mill engines
Post by: Jim on August 27, 2020, 07:00:30 pm
Yes Gil, its not a plant. These are orphans and its easy to build up a temporary 'plant' I've made them all modular so to speak.

How did you go on the East Coast with the storm that hit the US, were you far enough North to not be affected?
Title: Re: Twin MSM Pevensey single cylinder horizontal mill engines
Post by: RedRyder on August 27, 2020, 06:36:18 pm
Great engines and a great set up. They look and run beautifully.
By the looks of things, I imagine it is designed to break down easily when you want to power other engines with the 4" MSM boiler.


Thanks for sharing another great video, Jim...!!!


Gil
Title: Re: Twin MSM Pevensey single cylinder horizontal mill engines
Post by: Jim on August 27, 2020, 05:49:15 pm
Thanks Jan.
Title: Re: Twin MSM Pevensey single cylinder horizontal mill engines
Post by: classixs on August 27, 2020, 02:12:01 am
That sure is a beautiful setup Jim, thanks for sharing!
Title: Re: Twin MSM Pevensey single cylinder horizontal mill engines
Post by: Jim on August 26, 2020, 09:07:54 pm
I really love these engines, and do have one myself, but having two is obviously twice as nice. Having them symmetrically reversed so they are essentially a mirror image of each other is simply brilliant!!!

Thanks Daniel, they do make very nice model engines. I do like my Stuart boilers, but the MSM boiler is just so easy to use.
Title: Re: Twin MSM Pevensey single cylinder horizontal mill engines
Post by: Jim on August 26, 2020, 09:07:00 pm
A great Aussie engine.

They must be a great buy for people in countries with a stronger dollar than ours.
Title: Re: Twin MSM Pevensey single cylinder horizontal mill engines
Post by: Jim on August 26, 2020, 09:06:26 pm
That is a great setup Jim!
Those MSM engines are so nice.  ;D

Cheers Philip.
Title: Re: Twin MSM Pevensey single cylinder horizontal mill engines
Post by: Stoker on August 26, 2020, 08:42:53 am
I really love these engines, and do have one myself, but having two is obviously twice as nice. Having them symmetrically reversed so they are essentially a mirror image of each other is simply brilliant!!!
Title: Re: Twin MSM Pevensey single cylinder horizontal mill engines
Post by: Steam Technology on August 26, 2020, 04:09:29 am
A great Aussie engine.
Title: Re: Twin MSM Pevensey single cylinder horizontal mill engines
Post by: Swift Fox on August 26, 2020, 02:05:12 am
That is a great setup Jim!
Those MSM engines are so nice.  ;D
Title: Twin MSM Pevensey single cylinder horizontal mill engines
Post by: Jim on August 26, 2020, 01:29:56 am
Twin MSM Pevensey single cylinder horizontal mill engines running off a MSM gas fired 4" copper boiler.

https://youtu.be/rNUDQvtz17U