Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines

The Regular Stuff: Chat, Buy, Sell, Off Topic, etc. => General Discussion - Scale Model Gas Engines - Hit & Miss - Throttle Governed - Non-Compression – etc => Topic started by: crazydoug on October 19, 2020, 07:19:37 am

Title: Re: Little Brother Hit-and-Miss Engine
Post by: Jim on October 19, 2020, 10:12:46 pm

What beauty that is Doug.

Title: Re: Little Brother Hit-and-Miss Engine
Post by: RedRyder on October 19, 2020, 09:48:37 pm

Runs great!

Title: Re: Little Brother Hit-and-Miss Engine
Post by: St Paul Steam on October 19, 2020, 12:13:35 pm

Clicks right along...very nice.

Title: Re: Little Brother Hit-and-Miss Engine
Post by: Raphael on October 19, 2020, 08:36:25 am

Bonjour Doug,
I would have liked to be there to purchase an engine too because I would have seen it work.
Your one is very nice, runs very smootly and does not jum like Jin's ones  ;D

Title: Little Brother Hit-and-Miss Engine
Post by: crazydoug on October 19, 2020, 07:19:37 am

This was a purchase on the third day of the Coolspring engine show, making the show a success, since I bought at least one engine each day!  There were other buys to be had, but only limited funds available.  I also sold several engines at the show, which greatly helped towards the purchase of these new engines.  This Little Brother, although very sensitive to the choke setting, runs very well, and the machine work is excellent.

https://youtu.be/ie_bq1kXdKA