Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines

Builds, Repairs, Show Your Machines! => Videos The Office of Steam Cinema => Topic started by: St Paul Steam on November 01, 2020, 08:54:04 pm

Title: Re: Jensen #85ELTF (110V)
Post by: Jim on November 02, 2020, 10:29:49 pm

The twin flywheels just look great Bruce.

Title: Re: Jensen #85ELTF (110V)
Post by: Nick on November 02, 2020, 10:21:44 pm

Love these twin flywheel overtypes you build  8)

Title: Jensen #85ELTF (110V)
Post by: St Paul Steam on November 01, 2020, 08:54:04 pm

Hello fellow steamers, this is an improved version of one I started awhile back, I added a #75/25 chimney stack & chimney , & a nice wood plinth along with a brass tag. it has twin flywheels riding on 3 stanchions supported by 3 roller ball bearings , the engine is off of a #35 and is now 1/2" bore & double acting along with an immersion rod heater of 300W it is quite powerful for its size & turns over very smoothly & at low pressure (1.5 psi)

https://youtu.be/jiHQDZ8ENlU