Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines

Builds, Repairs, Show Your Machines! => Videos The Office of Steam Cinema => Topic started by: SimpleyMake on May 11, 2021, 12:27:05 am

Title: Re: Gamma Stirling engine trial run
Post by: SimpleyMake on May 13, 2021, 12:18:38 am

Quote from: eifion on May 12, 2021, 06:58:54 pm

nice one, works well

Thank you

Title: Re: Gamma Stirling engine trial run
Post by: SimpleyMake on May 13, 2021, 12:18:15 am

Quote from: Dampfopa on May 12, 2021, 03:24:50 pm

Runs really well. Congratulations!

Thank you

Title: Re: Gamma Stirling engine trial run
Post by: eifion on May 12, 2021, 06:58:54 pm

nice one, works well

Title: Re: Gamma Stirling engine trial run
Post by: Dampfopa on May 12, 2021, 03:24:50 pm

Runs really well. Congratulations!

Title: Re: Gamma Stirling engine trial run
Post by: SimpleyMake on May 12, 2021, 12:53:56 am

Quote from: Jim on May 11, 2021, 06:53:18 pm

That works very well Ganesh.

Thank you Jim.

Title: Re: Gamma Stirling engine trial run
Post by: Jim on May 11, 2021, 06:53:18 pm

That works very well Ganesh.

Title: Re: Gamma Stirling engine trial run
Post by: SimpleyMake on May 11, 2021, 09:17:41 am

Quote from: txlabman on May 11, 2021, 09:14:27 am

Very neat Ganesh.

Are all of the parts 3-d printed?

Thank you. Yes all are 3d printed parts. I have my own in house 3d printers for manufacturing my designs.

Title: Re: Gamma Stirling engine trial run
Post by: txlabman on May 11, 2021, 09:14:27 am

Very neat Ganesh.

Are all of the parts 3-d printed?

Title: Gamma Stirling engine trial run
Post by: SimpleyMake on May 11, 2021, 12:27:05 am

Hi all

Since it is complete lockdown here I was not able to get necessary things to develop my new Stirling engine product. I though of testing my new product with balloon as closing cap for displacer cylinder. To my surprise I was able to achieve 300 to 310 rpm easily. Now I am eager to try with glass piston and cylinder as closing cap and check the rpm.
https://youtu.be/pk62JKMUhpg