Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines

Builds, Repairs, Show Your Machines! => Collections & Pictures => Topic started by: Dampfopa on May 23, 2021, 01:57:15 pm

Title: Re: Bing rammer - or not?
Post by: Dampfopa on July 18, 2021, 10:17:40 am

Thanks for your assessment Rainer.

Und ein schönes Restwochenende.

Title: Re: Bing rammer - or not?
Post by: SolingerStahl on July 18, 2021, 09:11:45 am

Hi,
as I'm not very interested in stampers, so my knowledge about them is very less, but browsing my database its probably not a BING or DOLL, FALK, PLANK or MÄRKLIN...
My first thoughts were it could be a HESS... unfortunately HESS did only made double stampers and they looked different...  :'(
It also could be a KRAUSS(& MOHR) or a PRIMUS (Zschopau) but they also look different...
The bell-shape of the stampers is very charcteristic and should be an identifying fact.
I guess its likely more ARNOLD or BECKER who produced this one.
Greetings from Solingen
Rainer

Title: Re: Bing rammer - or not?
Post by: Dampfopa on July 16, 2021, 12:55:19 pm

Hello Bob, hello Arnold,

thank you for your answers. Marking of any kind is missing on the model. Would make things easier. The wooden foundation does indeed bear a striking resemblance to the Plank hot air motor foundation.

I will just keep looking and watching. Maybe someone will contact me who has recognized the model or has a catalog in which it is listed.

Title: Re: Bing rammer - or not?
Post by: tenniV11 on July 16, 2021, 05:42:02 am

Hello Juergen - I am not familiar with your model but when
compare with my "Bings" there is hardly much correspondence.
My tendency is more in direction of Plank - take a look
to the picture of a hot air motor. Similar Pillar with
Bullet top and wooden base in same way. Anyway - very nice
and like new status..
Arnold

Title: Re: Bing rammer - or not?
Post by: Earlytimes on July 15, 2021, 07:28:52 pm

Hello, Jurgen
 
 I have a couple of wood based Bing accessories, a butter churn and a line shaft. They have the GBN with the dot's in a 4 corner star pattern. The base sides on those its just right angle cut with a red stain. The tops are shiny natural wood like yours. Not a good match for you hammer, which is very nice.   

Title: Bing rammer - or not?
Post by: Dampfopa on May 23, 2021, 01:57:15 pm

Got this wooden based drive model from a seller in Vienna years ago. I suspect that it is a Bing rammer. The construction time is also unknown to me.

Does anyone have any information here? I would be pleased.

[attachimg=1]

[attachimg=2]

[attachimg=3]