Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines
The Regular Stuff: Chat, Buy, Sell, Off Topic, etc. => General Discussion - Model & Toy Steam Engines – Stirling Cycle – Flame Lickers – Small Antique Originals => Topic started by: ShadetreeMotorcycle on June 05, 2021, 03:56:27 pm
-
Many thanks to All who posted, with the possibility of a boiler that could rust, the low performance of generator and the need to spend $ to get the heater working in my country all ad up to me avoiding this unit. Appreciate the input!-Ben
-
I think from memory the heater is a Screw in immersion heater .
A U shaped element like old electric jugs
Easiest thing to do would be unscrew and replace .
-
Hi,
You would need a two phase 120V power supply or a big step-up transformer which is not really feasible unless you have one laying around.
I dont think that the replacement of the heating coil is an option, better stay away from this if you plan to run it, there are much better machines out there.
Regards,
Maurice.
-
Doesn’t answer your question, but will probably keep you from buying this engine...
https://www.officeofsteamforum.com/ebay/steam-engines-from-india/
-
I stumbled on this India made steam engine, I am not real interested in it but Am interested in learning about Electric heated units.
It is wired for 220v and 50Hz, in addition to change out the plug, what would be needed to run this on 120v and 60Hz usa power?
[attachimg=1]