Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines
The Regular Stuff: Chat, Buy, Sell, Off Topic, etc. => Wanted => Topic started by: St Paul Steam on November 27, 2021, 05:54:13 pm
-
Jim, I would be interested in selling the HM if Bruce does not want both, I will send him some photos tomorrow, or can just post here, probably later in the afternoon. Thanks - Greg
-
Nice job on that one Jim ,they do sell a bolt kit for the TVR1A but not this engine . may I ask ...did you build this engine ,and if so , how long did it take you ?
Bruce,
Yes I did build this one. It has been 15 years ago so I do not recall how long it took.
Jim in Minnesota
-
Bruce, I have two so I could let one go. Would also include an original copy of the instructions/build guide book.
Also, I have one of the small horizontal HM engines, if you would be interested in that one, I built both from their machined kits.
I might be interested in the HM1 if Bruce is not.
-
Bruce, I have two so I could let one go. Would also include an original copy of the instructions/build guide book.
Also, I have one of the small horizontal HM engines, if you would be interested in that one, I built both from their machined kits.
I had to look that one up , not near as interested in that one (have plenty of that type) but not going to rule it out entirely. Thanks for the offer.
-
Bruce, I have two so I could let one go. Would also include an original copy of the instructions/build guide book.
Nice , I have sent you a PM 😊
-
Bruce, I have two so I could let one go. Would also include an original copy of the instructions/build guide book.
Also, I have one of the small horizontal HM engines, if you would be interested in that one, I built both from their machined kits.
-
Bruce, I have two so I could let one go. Would also include an original copy of the instructions/build guide book.
-
Bruce,
I have a VR1 that I am not ready to give up quite yet (sorry). If you do order one from Graham Industries, Might I suggest that you assemble it with small brass bolts as I did mine. I think Graham sells a bolt kit for the TVR1, and maybe for the VR1 as well. Looks IMO much better than the fillister head screws that come with the kits.
(Attachment Link)
Jim in Minnesota
Nice job on that one Jim ,they do sell a bolt kit for the TVR1A but not this engine . may I ask ...did you build this engine ,and if so , how long did it take you ?
-
Bruce,
I have a VR1 that I am not ready to give up quite yet (sorry). If you do order one from Graham Industries, Might I suggest that you assemble it with small brass bolts as I did mine. I think Graham sells a bolt kit for the TVR1, and maybe for the VR1 as well. Looks IMO much better than the fillister head screws that come with the kits.
[attachimg=1]
Jim in Minnesota
-
with the addition of my TVR1ABB , I would like its little brother , a VR1A Fully Assembled Engine if anyone wants to let go of one before I buy a new one.
Cheers....