Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines
The Regular Stuff: Chat, Buy, Sell, Off Topic, etc. => Wanted => Topic started by: northmich on January 13, 2022, 03:06:04 pm
-
Hello PO9R4S4CHE,
Thanks for the reply. I'd welcome any help on the burner dimensions, and I appreciate the fact that you are in the US as am I (Michigan) and try my best to avoid using metric measurements. In my mis-spent youth I was a toolmaker/machinist and all of my calipers and micrometers are in inches. But + or - 1/32" dimensions would be adequate for fabricating the burner tank.
The firebox opening on the 130/280 measures 2 3/8"wide x 1 15/16"high, if yours is similar then we're in business.
Dan
-
I have a Bing 130/17/1? they look canily familiar to each other. I saw a nickssteam youtube video and the burner looks identical. I know they share common parts. let me know.
Jason[attachimg=1]
-
Bing 130/280 burner dimensions anyone?
I restoring a Bing 130/280 engine which is missing several parts including the burner.
As I am not likely to find one to fit, I intend to fabricate one as close as possible to the original.
If anyone has an intact Bing 130/280 and can provide dimensions (including the decorative firebox door) it would be appreciated.
I have seen what the burner looks like in some youtube videos but need some exact measurements.
Thanks, Northmich