Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines

The Regular Stuff: Chat, Buy, Sell, Off Topic, etc. => General Discussion - Model & Toy Steam Engines – Stirling Cycle – Flame Lickers – Small Antique Originals => Topic started by: Stoney D on June 03, 2022, 02:30:56 pm

Title: Re: MarvinIndustries Frankensteam. It's Alive, It's Alive.
Post by: St Paul Steam on June 03, 2022, 03:54:46 pm

Well alrighty , Another engine saved , nice work.

Title: MarvinIndustries Frankensteam. It's Alive, It's Alive.
Post by: Stoney D on June 03, 2022, 02:30:56 pm

(Continued from new member topic).  Epoxied to secure flywheel to shaft, replaced SV and whistle gaskets, replaced non-OEM valve with plug, mounted DIY smokestack, and compressed air function test seemed OK. (15 psi seems to run much too fast IMHO). Will let eldest grandson have pleasure of steam checking it and then see if he wants to keep it or not, he needs another hobby more than I do.  [attachimg=1] (Tried to attach short mp4 of it running but no luck)