Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines
The Regular Stuff: Chat, Buy, Sell, Off Topic, etc. => Classifieds - For Sale => Topic started by: SimpleyMake on May 13, 2023, 10:25:53 pm
-
Sold the model in an external site. In future if any of you interested in buying this model. please message me because I never have the products in stock, always on demand.
Thank you for your time
-
Hi all
Created a simple hot air engine kit for educational use. Available one piece, if interested please message me.
Model Cost: $32 and
Shipping cost: Flat rate $25 to any place.
Info:
**All plastic parts are 100% infill bulk printing
- Black parts are PLA FDM 3d printed plastic parts.
- No need for adhesives to assemble the model. Very intuitive and used M3 nuts/bolts to connect parts.
- Flywheel is attached with 10 M5 nuts at the circumference.
- Recommended run time 3 to 4 minutes. Runs on oil as well as alcohol based fuel. (Recommended is alcohol based to prevent carbon formation on glass)
- Power piston is glass
- Displacer piston is CNC machined aluminium cylinder with end cap.
- 3 degreased ball bearing for smoother run.
- Mandatory cold water to be filled in cold junction before run
What is included in the kit?
- 3D printed PLA plastic parts
- CNC machined aluminium displacer piston
- Glass displacer cyl and glass power piston
- Stainless stee; stand and wooden base
- Metal nut to guide the flame on displacer cyl
- Spirit lamp
- Rubber cork and silicone tube
- Bearings attached to parts, M5 nuts attached to flywheel, M3 nuts/bolts attached to parts
Run video: https://youtube.com/shorts/sfFt-dLLlhM?feature=share
Thank you for your time