Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines

The Regular Stuff: Chat, Buy, Sell, Off Topic, etc. => General Discussion - Model & Toy Steam Engines – Stirling Cycle – Flame Lickers – Small Antique Originals => Topic started by: gmacrunn on January 12, 2024, 05:28:48 pm

Title: Re: Steam engine smoke stack and fuel tray
Post by: St Paul Steam on January 12, 2024, 06:29:26 pm

The fuel tray looks like a Wilesco ,the chimney is obviously not Jensen , but probably much more rare than a Jensen chimney, the metal tag is used to tighten up the port hole ring in the front of the boiler.
Also greetings and warm welcome from St. Paul In.

Title: Steam engine smoke stack and fuel tray
Post by: gmacrunn on January 12, 2024, 05:28:48 pm

Hi,

I purchased a Jensen steam engine and the fuel tray that was included does not appear to be the correct one, number on the bottom is DBP980702 OR 960702, it is hard to read, also appears to have some writing along the top edge but I cannot get a good picture of that, possibly Jensen and a bunch of numbers but not sure, also got a smoke stack with it which is obviously not the correct one, approximately 5" tall ,Brass top, the rest looks like Copper,  it appears to have had a tag on it before, it has writing on it but it is not readable wondering if you can tell if these are Jensen or something else.

Pictures are attached, any information you can provide would be greatly appreciated.

I would like to sell these items.