Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines

Builds, Repairs, Show Your Machines! => Videos The Office of Steam Cinema => Topic started by: Steamandoil (Tim) on April 14, 2019, 09:27:06 pm

Title: Re: Last Jin hit and miss video I promise!
Post by: Stoker on April 17, 2019, 02:38:52 pm
Quote from: Jim on April 16, 2019, 07:59:09 pm
LOL You guys are pushing me close to the verge I'll have you know :)

Oh come on Jim .... jump over the edge with the rest of us mad fools .... you know you want to!!!
Title: Re: Last Jin hit and miss video I promise!
Post by: Steamandoil (Tim) on April 17, 2019, 01:46:53 pm
Slow Arrow I think the video is fuzzy a bit. All the screws are snug. Inside the box the screws that mount engine to it have come loose a couple of times. I run it mostly on white camping gas. I mix about 1/2 to 1 cc of marvels mystery oil with 10 cc of fuel. Or I have used 15 small droplets of 2 cycle oil in 10-11 cc. A 12 cc syringe and needle draws oil and fuel for mixing in a stainless cup. Ronson lighter fuel is good for first fire up or all day too. Not much difference I can tell.
Title: Re: Last Jin hit and miss video I promise!
Post by: Jim on April 16, 2019, 07:59:09 pm
LOL You guys are pushing me close to the verge I'll have you know :)
Title: Re: Last Jin hit and miss video I promise!
Post by: txlabman on April 16, 2019, 05:33:09 pm
Quote from: Nick on April 14, 2019, 09:35:43 pm
Best video of it yet Tim! BUT I have one complaint... Please DON'T let this be the last video  ;) ;)

I agree Nick!  ;D
Title: Re: Last Jin hit and miss video I promise!
Post by: Stoker on April 16, 2019, 02:41:39 pm
Oh? I think there'll be more ... maybe even quite a few more!

We seem to be enjoying these out of all proportion to their actuals, so they must be creating some form of Aura that has us all enthralled ... or is that enchanted!?!?
Title: Re: Last Jin hit and miss video I promise!
Post by: SlowArrow on April 16, 2019, 12:58:54 pm
Is there one fuel that it seems to run best on?
Title: Re: Last Jin hit and miss video I promise!
Post by: SlowArrow on April 16, 2019, 12:56:47 pm
Great video!  I noticed that the cylinder piece looks like it has come loose from the support base.  Maybe it's just an illusion from the video.......but it sure looks like the screws that attach the cylinder to the base are loose.

Title: Re: Last Jin hit and miss video I promise!
Post by: classixs on April 15, 2019, 03:47:47 am
Another great movie Tim, i really enjoyed it... so please keep them coming  :)
Title: Re: Last Jin hit and miss video I promise!
Post by: Stoker on April 14, 2019, 11:43:41 pm
Brrrrrup-biddy-upupup-biddy-rup-biddy-brrrrup-biddy-upup-biddy-brrup-brrup-brrup-biddy-upupup-biddy-up..........

Just practicing for if and when mine eventually shows up!

Thanks Tim for the rhythm instructions!   ;c)
Title: Re: Last Jin hit and miss video I promise!
Post by: St Paul Steam on April 14, 2019, 09:44:54 pm
another happy customer, nice exhaust pad Tim.
Title: Re: Last Jin hit and miss video I promise!
Post by: Nick on April 14, 2019, 09:35:43 pm
Best video of it yet Tim! BUT I have one complaint... Please DON'T let this be the last video  ;) ;)
Title: Last Jin hit and miss video I promise!
Post by: Steamandoil (Tim) on April 14, 2019, 09:27:06 pm
Just goofing with it. I hope all the orders get filled and delivered. So far the owners are happy with them , I estimate over 5 hours of run time on mine as of now. Camp fuel, lighter fluid, Marvels Mystery oil, Stihl 2 stroke oil. Runs good on all of it. I lube the heck out of it and it stays greasy. I blow it off with air and lube and run again. Now the vid:

https://youtu.be/JD0MVJSWP_Y