Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines
Builds, Repairs, Show Your Machines! => Videos The Office of Steam Cinema => Topic started by: Steamburns on August 01, 2024, 12:13:18 am
-
Nice enough video, though a bit more time doing the governor demo would have been good.
However, that is not a Stuart S/50, but rather a PMR #3, though I do get that this is part 2 so changes have been made.
-
Travis next time you steam this up mate can you put a bit of pressure on the flywheel so I can see how well those Jin governors work......thanks mate.
Here is a very good demo of the Jin governor working at its finest. I have this one at the utmost fine tuning based on pulley ratios, speed, and 2 o rings for adjustment.
There is a clip where I fully demonstrate a load and how the Governormkeeps
The same RPM’s.
https://www.youtube.com/watch?v=Evj34BOrCAU
-
Travis next time you steam this up mate can you put a bit of pressure on the flywheel so I can see how well those Jin governors work......thanks mate.
They work quite well if adjusted good - see my other steam plant on my YouTube channel.
-
Travis next time you steam this up mate can you put a bit of pressure on the flywheel so I can see how well those Jin governors work......thanks mate.
-
::)
Made another video compilation of this plant which never gets old to me. I enjoy making videos and taking angles so you can be there with me.
Just showing the running and shutting down. It’s a handsome plant in my eyes and I enjoy sharing again and again.
Enjoy.
https://www.youtube.com/watch?v=n16UXzrJT20