Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines

Builds, Repairs, Show Your Machines! => Technical Tips, Builds, and Help => Topic started by: Jim on October 16, 2024, 05:46:50 pm

Title: Re: Hi Temp Clear Coat on Jensen Orphan Boiler Brick Base
Post by: Jim on October 17, 2024, 05:54:05 pm

Quote from: Nick on October 17, 2024, 01:48:06 am

Nice work Jim 👍 but you need a whistle on there 😉

Yes.....and I wish I'd bought more of those extremely handy taps of Bruce @St Paul Steam

Title: Re: Hi Temp Clear Coat on Jensen Orphan Boiler Brick Base
Post by: Nick on October 17, 2024, 01:48:06 am

Nice work Jim 👍 but you need a whistle on there 😉

Title: Re: Hi Temp Clear Coat on Jensen Orphan Boiler Brick Base
Post by: Jim on October 16, 2024, 10:42:51 pm

Quote from: Stoker on October 16, 2024, 08:12:05 pm

Looks Sharp!

Thanks Daniel, that's a very handy boiler with a Supa Burner warming its belly.

Title: Re: Hi Temp Clear Coat on Jensen Orphan Boiler Brick Base
Post by: Stoker on October 16, 2024, 08:12:05 pm

Looks Sharp!

Title: Re: Hi Temp Clear Coat on Jensen Orphan Boiler Brick Base
Post by: Jim on October 16, 2024, 05:49:53 pm

[attachimg=1]

[attachimg=2]

[attachimg=3]

Title: Hi Temp Clear Coat on Jensen Orphan Boiler Brick Base
Post by: Jim on October 16, 2024, 05:46:50 pm

I used the two below cans of hi temp paint on a flame fired Jensen orphan boiler's brick base
and after some hard usage by my Grandson the clear coat still looks the same as when it was first cured.
Its also stood up terrifically on chuff pots etc etc


[attachimg=1]

[attachimg=2]

[attachimg=3]

[attachimg=4]

[attachimg=5]

[attachimg=6]