Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines
Builds, Repairs, Show Your Machines! => Videos The Office of Steam Cinema => Topic started by: RichSteamTx on November 04, 2024, 06:30:49 pm
-
I got the No. 17 running but I had to do some dodgy things. I really do like the looks of the engine, I'd even say its pretty sexy looking. The reverse is interesting, if you like to burn yourself on hot steam.
I am really hoping someone will share how you deal with this burner - seems there are many ways to set yourself on fire. Anyone has the #17 with its original burner plug?
1. Replaced the pivot arm for the Piston Rod, was completely missing.
2. JB Weld'ed whistle in.
3. Outside tank seam, bottom weeped - used superglue.
4. Underneath there was a massive amount of solder around around the circumference. Pretty bad leak, again used JB Weld.
5. Had to replace the sight glass but I really think its two small in outer & inner diameter. Got it from weedensteam.com
Here is a photo of the JB Weld, considering this is 3 steam ups not too bad. If this was a engine is much better cosmetic condition I would not have used JB Weld.
[attach=1]
https://www.youtube.com/watch?v=vE2rD7uznz0