Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines

Office of Steam ~GLOBAL POWER-UP~ virtual engine show => ENGINEERS HALL at Our 2025 GLOBAL POWER-UP - Virtual Engine Show…!!! => Topic started by: RedRyder on February 28, 2025, 06:36:37 pm

Title: Re: RedRyder's Table
Post by: Fullraceflathead on March 04, 2025, 05:28:16 am

Thank you for taking the time to take the nice sharp photos and making the videos for us that could not attend!!!

Title: Re: RedRyder's Table
Post by: RedRyder on March 02, 2025, 09:31:39 pm

.
Last offering for this weekend at The Office of Steam Forum Global Power-Up

It is the Stuart 800 Gas Engine with a cooling water supply piped into it.

I ran a garden hose from a tap in our heating oil tank room into the bottom of the engine.
What came out the top went into another garden hose that emptied into the sump pump well.

Enjoy,

Gil



https://www.youtube.com/watch?v=0ryCaJnFDF4

Title: Re: RedRyder's Table
Post by: RedRyder on March 02, 2025, 02:38:04 pm

And......

Some more dynamos and motors[attachimg=1]

Title: Re: RedRyder's Table
Post by: RedRyder on March 02, 2025, 01:28:10 pm

Here I will add a dynamo to the mix.

It was offered in the 1906 Stuart Turner Catalog.

Avery Multi Polar Dynamo

Enjoy,

Gil


https://www.youtube.com/watch?v=SGlqltI_dIU




[attachimg=1]


[attachimg=2]


[attachimg=3]




Here with a few other dynamos


[attachimg=4]

Title: Re: RedRyder's Table
Post by: RedRyder on March 02, 2025, 01:26:18 pm

Hi Don, just open the "Engineers Hall" board at the top of our index and post a new topic for your table.

You can name it Don6698's table or Don's Table or just about anything you wany.

All the best,

Gil

Title: Re: RedRyder's Table
Post by: don6698@comcast.net on March 02, 2025, 10:31:40 am

How do post my table here? Thanks!

Title: Re: RedRyder's Table
Post by: RedRyder on March 01, 2025, 08:57:18 am

Thanks, Raphael!

Title: Re: RedRyder's Table
Post by: Raphael on March 01, 2025, 08:33:51 am

Bonjour Gil,

Just amazing ! What a skillness !

Title: Re: RedRyder's Table
Post by: RedRyder on March 01, 2025, 08:13:23 am

World's only half-scale model of a Coles Corliss.

A superb precision build by Bill Huxhold

Enjoy,

Gil


https://www.youtube.com/watch?v=gapCEZ7H6eU





[attachimg=1]

Title: Re: RedRyder's Table
Post by: RedRyder on March 01, 2025, 08:09:03 am

Thanks, Nick!

Title: Re: RedRyder's Table
Post by: Nick on March 01, 2025, 07:43:10 am

Quote from: RedRyder on February 28, 2025, 06:36:37 pm

To be clear, I had no idea we would have a Global Power-Up 2025 until I found Nick's handy work this morning.

Was a last minute, 3am decision to keep it going… had posted plans a couple months ago, then we all kept getting sick and next thing I know, the weekend was here! I’m not expecting anyone to get carried away with elaborate displays, just hoping it encourages a few to fire up an engine and share a couple pics or a video. Will definitely be stopping back and your table when my weekend slows down, Tahoe for joining the fun!

Title: Re: RedRyder's Table
Post by: RedRyder on March 01, 2025, 06:23:32 am

Thanks, Raphael!

I hope to find time to add to it.

Title: Re: RedRyder's Table
Post by: Raphael on March 01, 2025, 02:50:27 am

Bonjour Gil,

I really like your table, and it's not to eat there  ;D

Title: RedRyder's Table
Post by: RedRyder on February 28, 2025, 06:36:37 pm

RedRyder's Table

Below is a video showing 3 gas engine models and one Rider Ericsson Stirling Cycle pumping engine.

To be clear, I had no idea we would have a Global Power-Up 2025 until I found Nick's handy work this morning.

Thanks, Nick, for all you do here!

Enjoy,

Gil


https://www.youtube.com/watch?v=1OPg7lGzLv0