Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines

The Regular Stuff: Chat, Buy, Sell, Off Topic, etc. => General Discussion - Model & Toy Steam Engines – Stirling Cycle – Flame Lickers – Small Antique Originals => Topic started by: don6698@comcast.net on April 05, 2025, 11:08:19 am

Title: Re: Spring Drive Belts
Post by: pwalchak on April 29, 2025, 08:33:11 pm

If you're not opposed to using watchmaker's belting, 1.5mm is available here: https://www.ebay.com/itm/195783630774

Title: Re: Spring Drive Belts
Post by: krypto31337 on April 06, 2025, 09:08:12 pm

Never bought any, but at McMaster's they are available as a "garter spring" if they carry the size you need.

Title: Re: Spring Drive Belts
Post by: St Paul Steam on April 06, 2025, 08:45:14 pm

Quote from: RedRyder on April 06, 2025, 09:50:06 am

How much of this are you looking for?

I have a couple pieces at 1.5 mm.

Gil

I would like to know where I can buy these as well.😊

Title: Re: Spring Drive Belts
Post by: RedRyder on April 06, 2025, 04:00:47 pm

Hi Don, I can send one long one. It is 19 5/8" long unstretched.

Has the tapered screw in on one end.

Please send me your address.

Title: Re: Spring Drive Belts
Post by: don6698@comcast.net on April 06, 2025, 12:56:27 pm

Gil. One or two pieces. Thanks , Don

Title: Re: Spring Drive Belts
Post by: RedRyder on April 06, 2025, 09:50:06 am

How much of this are you looking for?

I have a couple pieces at 1.5 mm.

Gil

Title: Spring Drive Belts
Post by: don6698@comcast.net on April 05, 2025, 11:08:19 am

Where can one purchase spring drive belts that are smaller than 2mm in diameter? Thanks!