Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines

The Regular Stuff: Chat, Buy, Sell, Off Topic, etc. => General Discussion - Scale Model Gas Engines - Hit & Miss - Throttle Governed - Non-Compression – etc => Topic started by: Jim on November 25, 2025, 06:56:47 pm

Title: Re: VORTRIXE & OKMO Z01 Morse Z 3.6cc Throttle-Controlled Miniature Gasoline Hit & Miss Engine Model
Post by: JinMachine on November 25, 2025, 11:48:49 pm

GOOD,Thanks FOR JIM.Jin

Title: Re: VORTRIXE & OKMO Z01 Morse Z 3.6cc Throttle-Controlled Miniature Gasoline Hit & Miss Engine Model
Post by: Jim on November 25, 2025, 09:45:42 pm

Quote from: St Paul Steam on November 25, 2025, 09:36:49 pm

Nice...😊

Really enjoying this engine Bruce.

Title: Re: VORTRIXE & OKMO Z01 Morse Z 3.6cc Throttle-Controlled Miniature Gasoline Hit & Miss Engine Model
Post by: St Paul Steam on November 25, 2025, 09:36:49 pm

Nice...😊

Title: VORTRIXE & OKMO Z01 Morse Z 3.6cc Throttle-Controlled Miniature Gasoline Hit & Miss Engine Model
Post by: Jim on November 25, 2025, 06:56:47 pm

Another short vid of the Z01 which is being running in very nicely, Jin is bringing out wonderful gas engines one after another, I've had so much enjoyment from this engine running straight from taking it out of the box and it sounds wonderful running.

I'm using Marvels Mystery Oil (which was hard to come by in Australia) at 20:1 with White Gas (Shellite in Australia) which is just enough to put a bit of colour into the fuel (you can use unleaded petrol). I also put in some Ballistol which is water soluble into the water that goes into the cooling tank.
(Called 'Moosemilk by black powder pistol and rifle shooters')

Jin @JinMachine is bringing out wonderful gas engines one after another.

https://youtu.be/GLcJFm9ds1A