Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines

The Regular Stuff: Chat, Buy, Sell, Off Topic, etc. => General Discussion - Scale Model Gas Engines - Hit & Miss - Throttle Governed - Non-Compression – etc => Topic started by: Nick on July 05, 2019, 12:39:44 am

Title: Spark Plug Boot
Post by: Nick on July 05, 2019, 12:39:44 am

Was watching the video below and really liked the spark plug boot vs the stock silicone tube. The owner of the video sent me a link, they can be found about half way down the page on the right.

http://cncengines.com/ic.html

[attachimg=1]

https://youtu.be/tx25m0YrJ0k

Title: Re: Spark Plug Boot
Post by: txlabman on July 14, 2019, 04:35:53 pm

Thanks Nick.

Title: Re: Spark Plug Boot
Post by: Nick on July 17, 2019, 12:05:35 am

Quote from: txlabman on July 14, 2019, 04:35:53 pm

Thanks Nick.

So have you joined the ET-1 club? or waiting for the new model?  ;D

Title: Re: Spark Plug Boot
Post by: Kmot on July 17, 2019, 06:01:26 pm

FWIW, I just put a #6 spade terminal on my wire. It fits good and snug.