Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines

Builds, Repairs, Show Your Machines! => Videos The Office of Steam Cinema => Topic started by: gbritnell on March 09, 2019, 11:39:14 am

Title: 90 degree V-twin engine
Post by: gbritnell on March 09, 2019, 11:39:14 am
This is my V-twin engine. I designed it with a 90 degree cylinder separation angle with the idea that it would be smoother. I used the open pushrods and rocker arms to give it a neater appearance. The crankshaft rides on sealed ball bearings and it has a pressure oil system to feed the rods and cams. It has an S&S dual fire ignition triggered by a Hall sensor.
gbritnell
https://youtu.be/FTtyO_voUU0