Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines
Builds, Repairs, Show Your Machines! => Videos The Office of Steam Cinema => Topic started by: Jim on April 01, 2019, 09:05:14 pm
-
Please show a Video or Photo tour of your workshop/work area, it doesn't matter how big or small it is. If its the kitchen table or the coffee table that you work with engines...that's ok!
I remember Bruce took us on a guided tour of his workshop some years ago.
-
I remember Jim took us on a video tour of his workshops some time back as well !!!
-
I remember Jim took us on a video tour of his workshops some time back as well !!!
Ok I'll go first :( I was hoping that Bruce would show us on a tour of his full blown work shop :)
This is from a few years ago -
https://youtu.be/8USLvZ99iag
-
That's plenty enough and more ... to keep you busy all the day through!!!
-
My new shop will be all done in about a month so I'll bang some pics up then.
-
This is a tour of my shop from about 10 years ago. I built a room in one corner of the basement about 12' x 12'. I have since replaced the round column Enco mill with a Grizzly knee mill but a lot of my engines were built with this mill. Computer is new plus added tooling.
gbritnell
https://youtu.be/K7_O2jPpmEg
-
I'm really impressed by these workshops and the people who can use them - takes a lot of skill and knowledge!
-
Great idea for a thread, Jim! You guys both have a sweet setup. Jim, your outside workshop is a good idea for my area, I just wouldn't be able to leave tools outside with the humidity here. My shop gets hot as all get out during the summer. A permanent workspace outside is brilliant.
George, your machine shop is impressive- I'd love that Craftsman. My Taig is...limited.
-
George and Jim:
Thank you for sharing the videos of your workshops.
Very impressive set-ups. I am drooling.
Charlie
-
That's plenty enough and more ... to keep you busy all the day through!!!
Its nice to pass time mucking around Daniel :)
-
My new shop will be all done in about a month so I'll bang some pics up then.
Its a date Pete :)
-
Its a date Pete :)
Sneak preview.small but big enough for me.
[attachimg=2]
-
George what a fantastic workshop, terrific pieces of machinery and that V twin engine that you designed is incredible. I could spend some time watching over your shoulder and learning a thing or two that's for sure!
-
Sneak preview.small but big enough for me.
Looks great Pete (so does the hound :) ) my space is tiny as well. You just get really clever at maximizing the space you have and also trains you (well sort of) not to be so messy :)
-
Looks great Pete (so does the hound :) ) my space is tiny as well. You just get really clever at maximizing the space you have and also trains you (well sort of) not to be so messy :)
Me last shop.
-
Great videos George and Jim and what a great use of space!
-
I will try to do a new video this weekend of my shop...I just haven't had the time...& most of my engines are not displayed, they're all on shelves many buried behind others.
-
Great videos George and Jim and what a great use of space!
These are definitely 2 shops to aspire for!
Thanks for posting the two great videos George and Jim.
-
I posted a video here:
http://www.officeofsteamforum.com/videos-the-office-of-steam-cinema/steam-cave-tour-filmed-with-my-dji-osmo-pocket/
-
This is a tour of my shop from about 10 years ago. I built a room in one corner of the basement about 12' x 12'. I have since replaced the round column Enco mill with a Grizzly knee mill but a lot of my engines were built with this mill. Computer is new plus added tooling.
gbritnell
https://youtu.be/K7_O2jPpmEg
George, your shop video reminded me of meeting you at the NAMES show shortly after the little V-twin was completed!
Gil
-
Please show a Video or Photo tour of your workshop/work area, it doesn't matter how big or small it is. If its the kitchen table or the coffee table that you work with engines...that's ok!
I remember Bruce took us on a guided tour of his workshop some years ago.
Hello Jim i have been asked to add my rather untidy workshop to this thread, its rather long so only half my contents on the video...Steve
https://youtu.be/BWS9maaI43E
-
Please show a Video or Photo tour of your workshop/work area, it doesn't matter how big or small it is. If its the kitchen table or the coffee table that you work with engines...that's ok!
I remember Bruce took us on a guided tour of his workshop some years ago.
Hello Jim i have been asked to add my rather untidy workshop to this thread, its rather long so only half my contents on the video...Steve
https://youtu.be/BWS9maaI43E
Steve, fantastic.
We like minded folks have the same interests and hobbies, that's why I like YouTube and forums like this, thank you for sharing with us.
Regards
Gary
-
Hello Steve, impressive collection ! I especially like the train layout. very well done sir....I enjoyed that.
-
Ah ha .... good on ya Steve. I see you found Jim's thread on workshop videos afterall, and went ahead and posted yours up.
Thanks again for the initial "private" tour, but I'm glad to see you are now sharing it with others as well. You have much of great interest to many of us here, much to be proud of, and well worth showing !!!
-
Steve, just spent lunch watching your tour. What a collection! The war items you've dug are impressive. Your collection has a great deal in common with mine...except I have substituted firearms for edged weapons.
The layout is quite nice, and well detailed. The spur with a timed stop is a great touch. I think I might take your idea and add a timed stop to my garden railway.
Thanks for the tour, I enjoyed every minute.
-
Please show a Video or Photo tour of your workshop/work area, it doesn't matter how big or small it is. If its the kitchen table or the coffee table that you work with engines...that's ok!
I remember Bruce took us on a guided tour of his workshop some years ago.
Hello Jim i have been asked to add my rather untidy workshop to this thread, its rather long so only half my contents on the video...Steve
https://youtu.be/BWS9maaI43E
Steve, fantastic.
We like minded folks have the same interests and hobbies, that's why I like YouTube and forums like this, thank you for sharing with us.
Regards
Gary
Hello Gary it makes a change for people to want to see my stuff my family think its all junk ;D...Steve
-
Hello Steve, impressive collection ! I especially like the train layout. very well done sir....I enjoyed that.
Thank you Bruce i have always had a train layout since i was about 10 years old in fact my train that i had back then has run on this layout and was in one of the sidings...Steve
-
Steve, just spent lunch watching your tour. What a collection! The war items you've dug are impressive. Your collection has a great deal in common with mine...except I have substituted firearms for edged weapons.
The layout is quite nice, and well detailed. The spur with a timed stop is a great touch. I think I might take your idea and add a timed stop to my garden railway.
Thanks for the tour, I enjoyed every minute.
Hello Benny im glad you liked it..we cannot have a proper collection of firearms over here so i have to satisfy myself with swords and bayonets.
The timed branch line has two rails but the other is manual but soon i am going to wire it up and fit the electronics to make it a timed line as well....Steve
-
Steve what a BRILLIANT tour of your man cave mate, I was enthralled every minute. Thanks for taking the time on the video to identify all the First World War relics that you have collected. My Grandfather was an Australian Light horseman in WWI.
Just a terrific man cave!
-
Steve what a BRILLIANT tour of your man cave mate, I was enthralled every minute. Thanks for taking the time on the video to identify all the First World War relics that you have collected. My Grandfather was an Australian Light horseman in WWI.
Just a terrific man cave!
Hello Jim it was a bit of a mish mash and being unscripted i kept forgetting the names of things which was annoying but i think most of it was self explanatory ....i missed a lot of stuff out because of time...i also have a 5 foot python in there as well which i forgot to mention ::) ...Steve
-
I will try to do a new video this weekend of my shop...I just haven't had the time...& most of my engines are not displayed, they're all on shelves many buried behind others.
Patience is a virtue that say....its been two years Bruce ;D ;D ;D ;D ;D
-
I will try to do a new video this weekend of my shop...I just haven't had the time...& most of my engines are not displayed, they're all on shelves many buried behind others.
Patience is a virtue that say....its been two years Bruce ;D ;D ;D ;D ;D
Doh...oh ,😳 the dog ate my steam shop, we had a forest fire , flood , pandemic...no wait ,that was you.
I offer no plausible excuse & throw myself on the mercy of the steam forum 😩
-
I will try to do a new video this weekend of my shop...I just haven't had the time...& most of my engines are not displayed, they're all on shelves many buried behind others.
Patience is a virtue that say....its been two years Bruce ;D ;D ;D ;D ;D
Doh...oh ,😳 the dog ate my steam shop, we had a forest fire , flood , pandemic...no wait ,that was you.
I offer no plausible excuse & throw myself on the mercy of the steam forum 😩
ROFLMAO!!!
(Rolling On Floor Laughing My Ass Off)
-
Better late than never? Here is the machine shop corner (the race car, a Formula Ford, has since departed), and the rest of the mess.[attachimg=1][attachimg=2]
-
Better late than never? Here is the machine shop corner (the race car, a Formula Ford, has since departed), and the rest of the mess. (Attachment Link) (Attachment Link)
First things first . What is that empty space to the left of the red tool cabinet and in front of the scroll saw . I have vaguely heard it referred to as floor space and i thought it was mythical?
The other thing of interest has two wheel and is hanging up ?
Cheers
Dennis
-
Inge what a terrific workshop space you have.
-
Better late than never? Here is the machine shop corner (the race car, a Formula Ford, has since departed), and the rest of the mess. (Attachment Link) (Attachment Link)
First things first . What is that empty space to the left of the red tool cabinet and in front of the scroll saw . I have vaguely heard it referred to as floor space and i thought it was mythical?
The other thing of interest has two wheel and is hanging up ?
Cheers
Dennis
Dennis
the 2 wheeler is a Zundap 200