Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines
The Regular Stuff: Chat, Buy, Sell, Off Topic, etc. => Wanted => Topic started by: St Paul Steam on January 13, 2023, 08:55:15 pm
-
Need 3 of them for a project please ,must be identical, just need the uprights, nothing else.
-
This will be interesting to see what you have planned.
-
This will be interesting to see what you have planned.
These are the only things holding me back Bret (has been for a while)
-
Bruce, is this what you are looking for...?
DOLL cast iron lineshaft transmissions #650/1, post #240/1 hight 20.5cm (8in), shaft hight 17.5cm (7in)
[attachimg=1]
or
DOLL cast pewter lineshaft transmissions #354/xx, post #206/4 hight 16.5cm (6.5in), shaft hight 15cm(6in)
[attachimg=2]
To get three similar of them is always somewhat difficult as they are mostly come as a pair...
If you only need three posts w/o base plate and w/o shaft & wheels I'm willing to negotiate disassembling the sets apart.
-
Wow Rainer, when it rains it poor's. PM sent.
-
Don't do it Rainer, don't break them up! Besides, Bruce wants 8"ers.(https://emoji.tapatalk-cdn.com/emoji12.png)
-
Tommy, don't worry... It seems that Bruce will take the both 8in cast iron transmissions complete as they are... ;) !
-
Don't do it Rainer, don't break them up! Besides, Bruce wants 8"ers.(https://emoji.tapatalk-cdn.com/emoji12.png)
That's a Pal right there...
-
#200?
-
#200?
very astute Nick, you have learned much grasshopper ;)
I believe I have what I need now :D
-
#200?
very astute Nick, you have learned much grasshopper ;)
I believe I have what I need now :D
It wasn’t a very hard one to guess :D
By the way, the catalog image shows 2 posts/stanchions, but the description says 3. I will be curious to see what you come up with…
-
#200?
very astute Nick, you have learned much grasshopper ;)
I believe I have what I need now :D
It wasn’t a very hard one to guess :D
By the way, the catalog image shows 2 posts/stanchions, but the description says 3. I will be curious to see what you come up with…
At a 20" long line shaft, it needs 3 stanchions, there are many things different in the description to what the photo actually shows, It says there are 10 pulleys, but only 9 on the board including the transfer transmission on the base, the drill press looks to be operated from the bottom pulley (which none have) I have some size appropriate stanchions coming, I already have the grinding table made, I have dozens of Jensen #100 pulleys that I can turn down....ect. i would like to have a really good, detailed photo of the add in my hands though.