Office of Steam Logo_1

Author Topic: Designing and maybe making a portable model railway.  (Read 1820 times)

Tony Bird

  • Full Member
  • ***
  • Posts: 582
  • Tony Bird
  • Location: Cardiff, South Wales, UK
Hi,

Well all the wood has been cut for the remaining seven boards.  All the fittings have been made so; it is assembly time after the fittings for legs have been attached.  As the legs for the four-leg board are slightly different from the others they have already had their fittings attached to them.  The remaining legs will be done tomorrow then the base boards themselves can be made.

The cut wood for the base boards.
[ Guests cannot view attachments ]
The legs fittings and dowel.
[ Guests cannot view attachments ]
The legs with their fitting for the four leg board.
[ Guests cannot view attachments ]
Any one have a use for a dozen 50 mm lengths of aluminium angle?  Have cut and machined the angle for the fittings I found these that my youg friend Gordon had made for me on his last visit!
[ Guests cannot view attachments ]

Regards Tony.