Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines

There are no plastic parts on the original Mamod RW2 Lumber Wagon (the logs are polystyrene).

Best to start by removing the drive bands then the three logs.

[ Guests cannot view attachments ]

The chassis side frames are held in pockets of the back of the drag beams by the buffers. Remove the buffers, then ease out the chassis side frame.

NOTE - the black baseplate is riveted to the drag beams & chassis side frames so do not force out the side frames too much.

[ Guests cannot view attachments ]

With both chassis side frames free of the drag beam you should be able to pop out the wheels. Fit Gauge 1 wheels, and reverse disassembly process.

Chris Cairns