Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines

Hello Larry
sounds like you have all you need , I have found that with a little persuasion the round banjo fitting on the boiler end of the steam line will usually twist off as its just a compression fit (you can also refit later), then I use medical grade silicone tubing (thick walled) & have never had a blow off with the pressures a Jensen S/V can maintain.
PM me if you need further help.

One quick question about the medical grade silicon tubing. Are you talking about 3/16" ID x 5/16" OD or did you get a different size and where did you find it? Thanks.