Office of Steam Logo_1

Author Topic: another M91 arrived in the post office today.  (Read 517 times)

RedRyder

  • Administrator
  • Hero Member
  • *****
  • Posts: 4313
  • Location: Connecticut - USA
Re: another M91 arrived in the post office today.
« on: March 26, 2020, 03:42:01 pm »
Hi Doug, For the sticky push rod, I just loosen the 2 nuts that hold the guide at the base of the cylinder. The holes have some slop. I pull the guide as far as possible away from the cylinder bore and tighten the nuts in that position. This is usually all it needs and everything is tightened as it should be.


Gil