Office of Steam Logo_1

« previous next »
Pages: [1]

Author Topic: Engine Converting  (Read 1636 times)

  • Jr. Member
  • **
  • Posts: 44
  • Location: Genève
Engine Converting
« on: January 22, 2021, 12:28:05 pm »
Hi.
Here, information about my work over the past few months.
A motor system Hot Bulb engine from Germany transformed into Hit & Miss.
I used a mixer provided by Pm Research, a regulator of my stock and an electronic ignition with Hall sensor.
I built the muffler and installed the spark plug.
It works with synthetic gasoline "Aspen" (gasoline for mower, brush cutter, chainsaw.)

Regards Christian.

Logged

  • Global Moderator
  • Engineer
  • *****
  • Posts: 5596
  • Location: St. Paul Indiana
Re: Engine Transformation
« Reply #1 on: January 22, 2021, 02:17:01 pm »
Nice work Christian,  I like the deep Ker-thunk sound it makes ,just like the big boys.
Logged
Bruce, St. Paul Indiana, USA
"Originality thrives in seclusion free of outside influences beating upon us to cripple the creative mind."
  Nikola Tesla

  • Sr. Member
  • ****
  • Posts: 1818
  • Location: The Winter Wonderland, Michigan.
Re: Engine Transformation
« Reply #2 on: January 22, 2021, 03:58:37 pm »
I like it too. Good work.
Logged
Tommy

"Steam it, like you mean it."

  • Full Member
  • ***
  • Posts: 726
  • Steam passionate and collector
  • Location: Saint-Mandé (France)
    • MYCP
Re: Engine Transformation
« Reply #3 on: January 22, 2021, 04:29:30 pm »
Bonjour Christian,
I agree with our colleagues, great jon indee ! I knew you were a steam specialist, I discover another face of your skillness.
Logged
Raphaël, Membre du Modèle Yacht Club de Paris : http://mycparis.fr/
Membre de l'Offshore Club de Paris: http://site-ocparis.wifeo.com/
Youtube : https://www.youtube.com/rhavrane

  • Administrator
  • Engineer
  • *****
  • Posts: 9191
  • Location: Minnesota, USA 🇺🇸
Re: Engine Transformation
« Reply #4 on: January 22, 2021, 08:53:11 pm »
Great Work! I love it  8)
Logged
Nick

  • Jr. Member
  • **
  • Posts: 61
  • Location: New Castle, Delaware USA
Re: Engine Transformation
« Reply #5 on: January 23, 2021, 01:52:01 pm »
 The belt operated hit and miss governor with different size pulleys for different speeds is genius!
Very nice engine!
 Scott
Logged

  • Jr. Member
  • **
  • Posts: 277
Re: Engine Transformation
« Reply #6 on: January 24, 2021, 02:32:27 pm »
Quote from: cheepo45 on January 23, 2021, 01:52:01 pm
The belt operated hit and miss governor with different size pulleys for different speeds is genius!
Very nice engine!
 Scott

Exactly my thoughts as well.
Logged

  • Administrator
  • Engineer
  • *****
  • Posts: 5070
  • Location: Connecticut - USA
Re: Engine Transformation
« Reply #7 on: January 24, 2021, 05:53:00 pm »
Well done, Christian...!

Very well done...!!!

Giol
Logged

  • Administrator
  • Engineer
  • *****
  • Posts: 6276
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: Engine Transformation
« Reply #8 on: January 24, 2021, 07:09:01 pm »
Wonderful model engineering work there.
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

  • Jr. Member
  • **
  • Posts: 44
  • Location: Genève
Re: Engine Converting
« Reply #9 on: January 25, 2021, 03:57:52 pm »
Hi  :D

Thank you very much for your comments, it is a pleasure to read you
Christian.
Logged
Pages: [1]
« previous next »