Office of Steam Logo_1

« previous next »
Pages: [1]

Author Topic: M91 Question  (Read 820 times)

  • Administrator
  • Engineer
  • *****
  • Posts: 6274
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: M91 Question
« on: January 03, 2021, 04:15:43 pm »
Quote from: RedRyder on January 02, 2021, 08:26:58 pm
Hi Jim, you can and should remove the plug to run it. You can use a needle oiler to put a couple drops on the big end of the connecting rod. Do not fill the crank case with oil. Before a run, place a drop of oil on the crank shaft next to each bearing on the outside. It will wick into thd bearing immediately.

Gil

Thanks Gil.
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

Pages: [1]
« previous next »