Office of Steam Logo_1

« previous next »
Pages: [1]

Author Topic: DIY Steam Turbine Run  (Read 940 times)

  • Administrator
  • Engineer
  • *****
  • Posts: 6280
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
DIY Steam Turbine Run
« on: October 31, 2022, 11:43:01 pm »
DIY Steam Turbine Run

Here's a run of my DIY Steam Turbine Run, terribly windy here today and the wind has been picked up by the camera's mic.
Hope you can still enjoy the video.



Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

  • Full Member
  • ***
  • Posts: 726
  • Steam passionate and collector
  • Location: Saint-Mandé (France)
    • MYCP
Re: DIY Steam Turbine Run
« Reply #1 on: November 01, 2022, 05:17:03 am »
Bonjour Jim,
Great job indeed !
How did you solve the premature bearing wear problem ?
JMC has made one which run over 60 000 RPM (!) and it has this problem :

(Subtitled  ;) )
Logged
Raphaël, Membre du Modèle Yacht Club de Paris : http://mycparis.fr/
Membre de l'Offshore Club de Paris: http://site-ocparis.wifeo.com/
Youtube : https://www.youtube.com/rhavrane

  • Full Member
  • ***
  • Posts: 396
  • Jim, tinplate toy trains, motors, steam
  • Location: Philadelphia, PA
    • Tinplate Times
Re: DIY Steam Turbine Run
« Reply #2 on: November 01, 2022, 10:09:36 am »
Neat video, Jim. Did you make that boiler?
Logged
The one who dies with the most toys, wins!

  • Global Moderator
  • Full Member
  • *****
  • Posts: 729
  • Location: Central Indiana
    • IndianaRog and the Temple of Steam
Re: DIY Steam Turbine Run
« Reply #3 on: November 01, 2022, 11:09:16 am »
Jim, very impressive setup....always love the sound of a turbine spooling up as they say!

Rog
Logged
my YouTube channel:  https://www.youtube.com/results?search_query=indianarog

my website:  IndianaRog.com

  • Administrator
  • Engineer
  • *****
  • Posts: 6280
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: DIY Steam Turbine Run
« Reply #4 on: November 01, 2022, 04:43:32 pm »
Quote from: Raphael on November 01, 2022, 05:17:03 am
Bonjour Jim,
Great job indeed !
How did you solve the premature bearing wear problem ?
JMC has made one which run over 60 000 RPM (!) and it has this problem :

(Subtitled  ;) )

I haven't had any problem with the bearings as yet and I've spun this up (on air) for hours at ridiculous speeds.

Easy to change out the bearings if they ever eventually need to be.
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

  • Administrator
  • Engineer
  • *****
  • Posts: 6280
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: DIY Steam Turbine Run
« Reply #5 on: November 01, 2022, 04:45:10 pm »
Quote from: skeptic49 on November 01, 2022, 10:09:36 am
Neat video, Jim. Did you make that boiler?

I bought from MSM here in Australia -

https://miniaturesteammodels.com/
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

  • Administrator
  • Engineer
  • *****
  • Posts: 6280
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: DIY Steam Turbine Run
« Reply #6 on: November 01, 2022, 04:46:54 pm »
Quote from: IndianaRog on November 01, 2022, 11:09:16 am
Jim, very impressive setup....always love the sound of a turbine spooling up as they say!

Rog

Thanks Rog :)
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

Pages: [1]
« previous next »