Office of Steam Logo_1

Author Topic: Grungy Jensen Steam Engines #50 Cleaned-up and Steamed-Up for a First Run at the Office of Steam  (Read 120 times)

RedRyder

  • Administrator
  • Hero Member
  • *****
  • Posts: 4313
  • Location: Connecticut - USA
This was a pretty grungy engine when it arrived.
The dust had been wiped away but that is all.

The wood base had glue at corners and some edges.
The seller glued together some of the internal foam support.
He actually did a terrific job of packing it for bullet proof transport.
The glue on the wood was an accident, I'm certain.

Much of the nickel plating had a lot of that God awful green oxidation.

The wood, cast iron, sheet metal and boiler all had silver spray enamel drops in the hundreds.
I scraped them off gently one at a time with the corner of a scraper blade.
A time consuming task but well worth the effort.

There some more work to do at another time.

For this steam-up I borrowed a period correct blue horse shoe generator from another Jensen #50 because the one that came with this piece is unusable as is. You will see why in the video.

Enjoy!

Gil


A lot of the silver dot speckles remaining after initial wipe down.

[ Guests cannot view attachments ]


[ Guests cannot view attachments ]


[ Guests cannot view attachments ]




I left the silver speckles on the decal as I did not wish to risk ruining one in such good original condition.

[ Guests cannot view attachments ]




A neat thing here..... The core base wood is a single 18" wide board.

[ Guests cannot view attachments ]




Worth the extra effort

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

RedRyder

  • Administrator
  • Hero Member
  • *****
  • Posts: 4313
  • Location: Connecticut - USA
And.....

         The video



St Paul Steam

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4832
  • Location: St. Paul Indiana
Another interesting Jensen #50 project, I'm sure you'll do it justice.
Bruce, St. Paul Indiana, USA
"Originality thrives in seclusion free of outside influences beating upon us to cripple the creative mind."
  Nikola Tesla

crazydoug

  • Full Member
  • ***
  • Posts: 805
Nice result after alot of effort. How many 50's do you own now?

Stoker

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3620
  • Wherever you go ......... there you are!
  • Location: Eastern Sierra
Oooooohhhhhhh ....... Rivet boiler #50 ............. Aaaaaahhhhhhhhh!!!!!


Nice work, as always Gil!
"Information is not knowledge, Knowledge is not wisdom, Wisdom is not truth, Truth is not beauty, Beauty is not love, Love is not music: Music is THE BEST...   
Wisdom is the domain of the Wis (which is extinct). Beauty is a French phonetic corruption of a short cloth neck ornament currently in resurgence..."
F. Zappa ... by way of Mary, the girl from the bus.

RedRyder

  • Administrator
  • Hero Member
  • *****
  • Posts: 4313
  • Location: Connecticut - USA
The wood shows 100% the original finish. I added no wax, tung oil, or anything similar.

I was able to deep clean the surface using original GoJo hand cleaner. (the smooth kind, no pumice or abrasive)

I rubbed it by hand with 00000 steel wool (5 zeros) and the GoJo hand cleaner. This technique also works great for cleaning old painted surfaces. I used it on the cast engine base as well.

Of note, if you clean a surface with GoJo, it may soften the original paint and you want to avoid touching it for a day or 2. 
The paint will harden up again.

Gil

IndianaRog

  • Global Moderator
  • Full Member
  • *****
  • Posts: 729
  • Location: Central Indiana
    • IndianaRog and the Temple of Steam
Gil, you did wonders cleaning that one up....what a mess as received!

Rog
my YouTube channel:  https://www.youtube.com/results?search_query=indianarog

my website:  IndianaRog.com

RedRyder

  • Administrator
  • Hero Member
  • *****
  • Posts: 4313
  • Location: Connecticut - USA
UPDATE.....

I located a table top bakelite receptacle on ebay.
It is the absolute correct period part for this engine.

The brown cloth cord is an incorrect modern reproduction that will be replaced when I locate my new old stock cloth cord.

Gil



[ Guests cannot view attachments ]