Office of Steam Logo_1

« previous next »
Pages: [1]

Author Topic: IND-X run for fun!  (Read 1543 times)

  • Sr. Member
  • ****
  • Posts: 1202
IND-X run for fun!
« on: April 21, 2022, 12:33:21 pm »
  I'm working on another ELEKTRO...I added one of my 380 watt tube heaters
with heatsink and the unit now heats up well.  I re-gasketed the whistle
and it works....ok.  Unfortunately, the engine is a leaker and I'll have
to fix the slide valve and piston like I did on another ELEKTRO.  So, all
steam and no run.

  Well, I turned to one of my old faithful engines, the IND-X with two
flywheels, to satisfy my steaming needs.  No disappointment here.  Runs
pretty well slow or fast.  I added a video for kicks and giggles.



Happy steaming,
Wayne
Logged

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2529
  • Location: Jutland
    • www.SteamUp.dk
Re: IND-X run for fun!
« Reply #1 on: April 21, 2022, 01:14:04 pm »
Not everyday we get the chance to see one of these under steam...

I really enjoyed the movie, thanks for sharing Wayne!

PS. Do keep us posted on the Elektro ;)
Logged
Cheers
Jan
WEBSITE: SteamUp YOUTUBE: SteamUp

  • Sr. Member
  • ****
  • Posts: 1088
  • that's all I have to say about that
  • Location: Switzerland - Lake of Constance
    • Emco Unimat
Re: IND-X run for fun!
« Reply #2 on: April 21, 2022, 01:49:45 pm »
Elektro new to me - sturdy construction and
runs nice, thanks for sharing
Arnold ;D
Logged

  • Sr. Member
  • ****
  • Posts: 1202
Re: IND-X run for fun!
« Reply #3 on: April 21, 2022, 02:01:58 pm »
It's nice to run an engine you know will work,
especially after working on an engine that just
plain isn't ready to go.

Arnold...The engine shown is the IND-X.  The
ELEKTRO still needs work so the IND-X was a
consolation run.

Wayne
Logged

  • Full Member
  • ***
  • Posts: 832
Re: IND-X run for fun!
« Reply #4 on: April 21, 2022, 05:36:05 pm »
Nice running. Do you have a link to the tube heater you use. Does it go inside the boiler or at tech underneath?
Thanks
Crazydoug
Logged

  • Sr. Member
  • ****
  • Posts: 1202
Re: IND-X run for fun!
« Reply #5 on: April 22, 2022, 10:41:41 am »
Doug...I added some pix to give an idea of how I
used the tube heater for the ELEKTRO.  I've also
seen it done for an EMPIRE 31.  I added a link to
my ELEKTRO (my third) running with this heater setup
and my home-made 'twisted' Teflon tape rings.



Always happy to talk ELEKTRO's and EMPIRE's,
Wayne
Logged

  • Global Moderator
  • Engineer
  • *****
  • Posts: 5596
  • Location: St. Paul Indiana
Re: IND-X run for fun!
« Reply #6 on: April 22, 2022, 11:19:57 am »
Nice work on the Electro, while it may not still be raising sufficient steam. It's a testament to the engine build that it runs so well with very little pressure.
Logged
Bruce, St. Paul Indiana, USA
"Originality thrives in seclusion free of outside influences beating upon us to cripple the creative mind."
  Nikola Tesla

  • Sr. Member
  • ****
  • Posts: 1202
Re: IND-X run for fun!
« Reply #7 on: April 22, 2022, 01:01:37 pm »
  Thanks for the compliment.  ELEKTRO's have been my 'White Whale' for
several years.

  Heating is not the problem...I needed to refine the teflon tape
'ring'.  Well, I did so (only the upper ring land) and am 'Running
it in' now using a setup from my 1960's erector set.  I'll steam
it up before the end of the day and see the latest.  I added a short
video of the 'Run-in'.



Having fun, recovering from the Wuhan flu,
Wayne
Logged
Pages: [1]
« previous next »