Office of Steam Logo_1

Author Topic: Mini Impeller Pump (P70  (Read 140 times)

JinMachine

  • Jr. Member
  • **
  • Posts: 141
    • http://www.microcosm-engine.com/
Mini Impeller Pump (P70
« on: November 16, 2020, 09:27:29 am »
The length is 70MM, the width is 42MM, and the height is 76MM. The weight is 143G.
It is very suitable to use a small engine to drive it to work together.
https://www.ebay.co.uk/itm/373343289717
[ Guests cannot view attachments ]
[ Guests cannot view attachments ]
[ Guests cannot view attachments ]



St Paul Steam

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2041
  • Location: St. Paul Indiana
Re: Mini Impeller Pump (P70
« Reply #1 on: November 16, 2020, 01:43:37 pm »
A handsome outfit,  so this is a water pump , an air turbine, an air pump ??? I don't think I understand quite yet.
Bruce
St. Paul Indiana , USA

classixs

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 1139
  • Location: Jutland
    • www.SteamUp.dk
Re: Mini Impeller Pump (P70
« Reply #2 on: November 18, 2020, 12:01:46 pm »
Best guess is that it is a standard rubber impeller pump, often referred to as Jabsco pumps in the maritime world.
Very efficient pumps, as long as they aren´t allowed to run dry.
WEBSITE: SteamUp
YOUTUBE: SteamUp

St Paul Steam

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2041
  • Location: St. Paul Indiana
Re: Mini Impeller Pump (P70
« Reply #3 on: November 20, 2020, 08:33:12 pm »
It would be nice to see this in action pumping .
Bruce
St. Paul Indiana , USA

Scorpion2nz

  • Full Member
  • ***
  • Posts: 403
Re: Mini Impeller Pump (P70
« Reply #4 on: November 21, 2020, 05:42:21 pm »
Best guess is that it is a standard rubber impeller pump, often referred to as Jabsco pumps in the maritime world.
Very efficient pumps, as long as they aren´t allowed to run dry.

Impellor looks brass to me

St Paul Steam

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2041
  • Location: St. Paul Indiana
Re: Mini Impeller Pump (P70
« Reply #5 on: November 21, 2020, 08:57:41 pm »
Best guess is that it is a standard rubber impeller pump, often referred to as Jabsco pumps in the maritime world.
Very efficient pumps, as long as they aren´t allowed to run dry.

Impellor looks brass to me
I agree , it looks quite well made & performs as good as it looks (maybe better) , thanks for supplying us with  the video Jin .
Bruce
St. Paul Indiana , USA

 

November EOTM Winner:

Clif’s Lanz Bulldog Scale Model