Office of Steam Logo_1

« previous next »
Pages: [1]

Author Topic: PM Research #7 on the way  (Read 1038 times)

  • Administrator
  • Engineer
  • *****
  • Posts: 9191
  • Location: Minnesota, USA 🇺🇸
PM Research #7 on the way
« on: September 25, 2022, 05:46:25 pm »
Had to pay over the top for this one, but everything about it says it is a brother to my John Coleman built Stuart S-50

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]
Logged
Nick

  • Administrator
  • Engineer
  • *****
  • Posts: 6276
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: PM Research #7 on the way
« Reply #1 on: September 25, 2022, 06:27:18 pm »
Very nice Nick and they do look very similar.
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

  • Administrator
  • Engineer
  • *****
  • Posts: 9191
  • Location: Minnesota, USA 🇺🇸
Re: PM Research #7 on the way
« Reply #2 on: September 25, 2022, 07:44:59 pm »
I had it for $160 for what seemed like 30 seconds, but the auctioneer kept it going and then the bidding took off  ::)  :D  I let these two go for bargain prices as I was saving my pennies for the #7


[ Guests cannot view attachments ]

[ Guests cannot view attachments ]
Logged
Nick

  • Full Member
  • ***
  • Posts: 502
  • Location: USA
Re: PM Research #7 on the way
« Reply #3 on: September 25, 2022, 08:32:18 pm »
Very nice, Nick!
That walking beam seems like a bargain!
Logged
Mike

Check out my YouTube channel here: https://www.youtube.com/user/Cletrac

  • Global Moderator
  • Engineer
  • *****
  • Posts: 5596
  • Location: St. Paul Indiana
Re: PM Research #7 on the way
« Reply #4 on: September 25, 2022, 08:35:43 pm »
Some nice & (& expensive) hardware on the PMR #7 Nick , its as decked out as I've seen one of those. The Stuart beam & #9 went for bargain prices.
Logged
Bruce, St. Paul Indiana, USA
"Originality thrives in seclusion free of outside influences beating upon us to cripple the creative mind."
  Nikola Tesla

  • Global Moderator
  • Engineer
  • *****
  • Posts: 5155
  • Wherever you go ......... there you are!
  • Location: Eastern Sierra
Re: PM Research #7 on the way
« Reply #5 on: September 25, 2022, 11:13:46 pm »
Both the beam and #9 seem to have gone for well less than half of what they perhaps should have gone for, and if the build quality on them is as good as they look, then maybe really only a third or even a quarter of their true worth!?!?
Logged
"Information is not knowledge, Knowledge is not wisdom, Wisdom is not truth, Truth is not beauty, Beauty is not love, Love is not music: Music is THE BEST...   
Wisdom is the domain of the Wis (which is extinct). Beauty is a French phonetic corruption of a short cloth neck ornament currently in resurgence..."
F. Zappa ... by way of Mary, the girl from the bus.

  • Administrator
  • Engineer
  • *****
  • Posts: 9191
  • Location: Minnesota, USA 🇺🇸
Re: PM Research #7 on the way
« Reply #6 on: September 26, 2022, 12:03:27 am »
I already have a very nice 9 built by Jed so wasn’t too interested in adding another, but I am still after a good Stuart beam and it was very hard to watch that one go as cheap as it did! Even with $100 shipping and 30% premium it was still a bargain… probably a $1000-1200 engine
Logged
Nick

  • Sr. Member
  • ****
  • Posts: 1088
  • that's all I have to say about that
  • Location: Switzerland - Lake of Constance
    • Emco Unimat
Re: PM Research #7 on the way
« Reply #7 on: September 26, 2022, 05:49:49 am »
Congrats Nick, nice addition to your collection - the beam and 9 where under there value.
I joined the Ladenburger online Auction and there I have seen the steal of the year:


https://www.spielzeugauktion.de/catalogs/15401/categories/0/pages/4?lang=de&


Nr. 177 - a Stuart Victoria with Regulator, a Steam driven water pump, a Steam condenser
and the top of the line Boiler "Baden" (gas powered).
The Hammer price was 160 Euros - this was once the price for the Manometer and Safety Valve!!!

Arnold ;D

[ Guests cannot view attachments ]
Logged

  • Administrator
  • Engineer
  • *****
  • Posts: 5070
  • Location: Connecticut - USA
Re: PM Research #7 on the way
« Reply #8 on: September 26, 2022, 07:37:08 am »
Hi Nick, Nice engine package and the governor set-up clearly has John Coleman written all over it. However John was a very well educated engineer and would not likely stick a whistle on a steam chest so that may have been the owner's idea.

Gil
Logged

  • Administrator
  • Engineer
  • *****
  • Posts: 6276
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: PM Research #7 on the way
« Reply #9 on: September 26, 2022, 04:43:25 pm »
The Beam & #9 would have been terrific buys.
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

Pages: [1]
« previous next »