Office of Steam Logo_1

« previous next »
Pages: [1]

Author Topic: Update of PSE beam engine review.  (Read 1088 times)

  • Full Member
  • ***
  • Posts: 832
Update of PSE beam engine review.
« on: November 08, 2021, 12:52:22 pm »
I had a chance to run in the engine today for 3hrs with oil added every 15 minutes. It now runs on 7 psi and at a much more realistic slower speed. I even steamed it on my jensen 20 boiler. It ran much longer than before, but did peter out before the boiler ran low.
I will give it another 3 or 4 hrs run in when i have the time. If i can get it down to running on 5psi, i think my jensen 20 would run it properly.
Logged

  • Global Moderator
  • Engineer
  • *****
  • Posts: 5596
  • Location: St. Paul Indiana
Re: Update of PSE beam engine review.
« Reply #1 on: November 08, 2021, 01:09:58 pm »
That's encouraging 😊
Logged
Bruce, St. Paul Indiana, USA
"Originality thrives in seclusion free of outside influences beating upon us to cripple the creative mind."
  Nikola Tesla

  • Sr. Member
  • ****
  • Posts: 1202
Re: Update of PSE beam engine review.
« Reply #2 on: November 08, 2021, 02:12:41 pm »
Congratulations.  Sometimes things do work out
the way you hope.  And, it is good news for other
potential PSE buyers.

Good Luck,
Wayne
Logged

  • Full Member
  • ***
  • Posts: 740
  • Location: Lennestadt, Siuerland, Germany
Re: Update of PSE beam engine review.
« Reply #3 on: November 09, 2021, 01:08:28 pm »
A beautiful success. You had the right idea.
Logged
Cheers
Jürgen
Dealing with steam is one way of having fun in life.

  • Administrator
  • Engineer
  • *****
  • Posts: 9193
  • Location: Minnesota, USA 🇺🇸
Re: Update of PSE beam engine review.
« Reply #4 on: November 09, 2021, 05:49:24 pm »
Good to hear it’s running in well  8)
Logged
Nick

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4122
  • Location: Plano, Texas
Re: Update of PSE beam engine review.
« Reply #5 on: November 10, 2021, 10:30:35 am »
Thanks for the update Doug!
Logged

  • Jr. Member
  • **
  • Posts: 52
    • PSE - Polish Steam Engines and wood crafts
Re: Update of PSE beam engine review.
« Reply #6 on: November 18, 2021, 09:50:23 am »
We know this problem, we have tried various solutions, but thanks to these small holes we are able to imitate the sound of a real steam engine.

If the exit holes were larger, the sound of the running machine would not be so pleasant.

Something for something. Maybe someday we will find a different solution.


Joe, thanks for the nice review. I encourage other users to order their favorite model from us.


Maciek - POLISH STEAM ENGINES
Logged
Pages: [1]
« previous next »