Office of Steam Logo_1

« previous next »
Pages: [1]

Author Topic: Wilesco stationary engine and aquarium pump questions?  (Read 1169 times)

  • Full Member
  • ***
  • Posts: 855
Wilesco stationary engine and aquarium pump questions?
« on: January 20, 2021, 11:49:48 am »
Hello, I have recently got the bug to get a model stationary steam engine! I have a few questions:

I am not stuck on Wilesco brand, is there are more desirable brand? Or model? I am looking for a model that runs well, and looks good!

Also, could a Wilesco style engine be run on an aquarium pump? If so, is there a desirable model aquarium pump? I don't want to run it all the time on aquarium pump but thought it would be quiet and clean for long slow display runs. Any thoughts would be appreciated!
Logged

  • Administrator
  • Engineer
  • *****
  • Posts: 9192
  • Location: Minnesota, USA 🇺🇸
Re: Wilesco stationary engine and aquarium pump questions?
« Reply #1 on: January 20, 2021, 12:23:56 pm »
Three models that I would highly recommend looking into for plenty of power in a relatively small base footprint would be the Wilesco D16 or the Jensen 65 and the 75. If you want to try electric, go for a Jensen 25
Logged
Nick

  • Administrator
  • Engineer
  • *****
  • Posts: 9192
  • Location: Minnesota, USA 🇺🇸
Re: Wilesco stationary engine and aquarium pump questions?
« Reply #2 on: January 20, 2021, 12:26:32 pm »
And yes, an aquarium pump will run them, but I prefer using a compressor with a large tank so I don’t have to here it running at all.

I should also mention if you go for a Wilesco, look for an older grey-based one vs the newer blue base. Jensens, look for one that has the skinny hour glass or straight red handles vs the newer fat “snowman” shaped handles.
Logged
Nick

  • Global Moderator
  • Engineer
  • *****
  • Posts: 5596
  • Location: St. Paul Indiana
Re: Wilesco stationary engine and aquarium pump questions?
« Reply #3 on: January 20, 2021, 12:38:33 pm »
Asking people what's a good engine will elicit many varying opinions, I for one am a Jensen fan & here lately have acquired many wilesco's,  its really a personal preference. You can get a bad or nice engine in any category. this is a good question & is asked frequently. my usual response is a nice used Jensen #75 & for a bit more $$ is the same engine...a Jensen #25 with a built in heater. In the Wilesco line up a #20 is a good starter engine with decent power. As with all used steam plants condition plays an important role. You have to be particularly observant with Wilesco boilers as they suffer more from dezink (boiler rot) & are thinner than Jensen boilers and are also soft soldered as oppose to the Jensen silver brazed (much stronger)
Re: aquarium pump , I have one that is variable speed & has 2 outlets that I connect together & its capable of approx 3psi ,good for most reasonably tuned steam engines.
Good luck with your hunt & keep us posted with what you settle on.
Logged
Bruce, St. Paul Indiana, USA
"Originality thrives in seclusion free of outside influences beating upon us to cripple the creative mind."
  Nikola Tesla

  • Full Member
  • ***
  • Posts: 855
Re: Wilesco stationary engine and aquarium pump questions?
« Reply #4 on: January 20, 2021, 01:00:20 pm »
Thanks guys!

I would like info on the make and model of aquarium pump with 3psi output please?

Also, I noticed on some of the larger Wilesco stationary engines there seems to be oil cups cast in top of main bearing towers supporting flywheel...can anyone tell me if they are functional? These seem desirable to me.
Logged

  • Global Moderator
  • Engineer
  • *****
  • Posts: 5596
  • Location: St. Paul Indiana
Re: Wilesco stationary engine and aquarium pump questions?
« Reply #5 on: January 20, 2021, 01:16:53 pm »
Logged
Bruce, St. Paul Indiana, USA
"Originality thrives in seclusion free of outside influences beating upon us to cripple the creative mind."
  Nikola Tesla

  • Global Moderator
  • Engineer
  • *****
  • Posts: 5596
  • Location: St. Paul Indiana
Re: Wilesco stationary engine and aquarium pump questions?
« Reply #6 on: January 20, 2021, 01:25:12 pm »
Quote from: St Paul Steam on January 20, 2021, 01:16:53 pm
I have a fusion 700 that has served me well for 7-8 yrs(no longer made I see), but most 300 gallon 65 GPh plus duel outlet pumps should suffice.
The Wilesco oil cups are functional & because they are more than adequate...I don't bother with installing roller ball bearings in them.

https://www.ebay.com/itm/Dual-Outlet-Aquarium-Air-Pump-65GPH-Silent-Fish-Tank-Aerator-Oxygen-Pumps-Stones/124492812570?_trkparms=ispr%3D1&hash=item1cfc59911a:g:fJQAAOSw~Clf3ISo&amdata=enc%3AAQAFAAACgBaobrjLl8XobRIiIML1V4Imu%252Fn%252BzU5L90Z278x5ickkp2NA0WuhQytmt4dbStg00JmClrRvtnwDGRmhpf7jm0EBnLPkJYsvmxcdWWcKHp2ftJxv%252Btok%252FG5uKEmMYDhGlFEEd0zNGSIOrgvQF7tdCdWutgrPIym8TIP4fjJ9TAlfgEeqK21DuFiC8LiDaInNqIz2gSacLal%252BrXp8omJJaKliOydcK0QMaka15FdQZw9nlDlCC2RRZAXt8qVEfA75HKrrPK5PcG7p%252F%252Bw6FK2W%252Bitjn77W2kpWsg%252BptKekbO3RJFbPYa3G2ZEgovJkTFScYbGUmxa%252B3OfRh1%252FMIqOznQyfPjvb%252BvSNUxCsX63fyuQbkQAjtNf7vbE5bIKJMmQ3t4H%252BGMhheOZ2EDv%252FrgJrKC5OEtVegV8Lj2DCLd2VDSyCdmH9mDRk4M9Kb3GoJKyxLx29Vrle4OD4XGoUFmnjxp3DBNRsN6sFDYVpTJCs6kMGfBlN9ksLLhRALwUKD5e4gSA%252FUVIGpT%252BdQjL77vJh95CDg3s4wkjT5g0br%252FLUyN1T%252FwG0PtQ7La8SpYNJb1BNPEv30Ip6F81qvVA1nOWbwnHRHewfxtfM9kYfq60y2Pfc3pFaxLr%252F5o63FBNuvbBGWQhTEV1X%252FVLv94%252FRX1h%252B1psAftwVIhu45ePR2MBocakcE7NYFHC%252FVSkSB470ogcLN5GaKBvUWbD2tvMHLqSaBNUqlLDBG%252BAaa6aqweRTrD6nJygr4PalSgpLtG5hflmFKOmsCC9hh0JB4xyaUBycOKlAoGJZzyxGtYJOkKKHIPrSTAjY9eNWGSAWnX7hLlIeYmco4UnxpyhqPTzljurjAqQ%253D%7Ccksum%3A1244928125702f0ae14b50f44be3bde86fcc470bbe9b%7Campid%3APL_CLK%7Cclp%3A2334524
Logged
Bruce, St. Paul Indiana, USA
"Originality thrives in seclusion free of outside influences beating upon us to cripple the creative mind."
  Nikola Tesla

  • Full Member
  • ***
  • Posts: 855
Re: Wilesco stationary engine and aquarium pump questions?
« Reply #7 on: January 20, 2021, 02:15:07 pm »
Thanks for the link!...seems a great price as well :D
Logged

  • Full Member
  • ***
  • Posts: 855
Re: Wilesco stationary engine and aquarium pump questions?
« Reply #8 on: January 20, 2021, 03:45:17 pm »
Regarding the older grey base vs newer blue base....can someone elaborate on what was made more cheap or the difference in construction??
Logged

  • Sr. Member
  • ****
  • Posts: 1818
  • Location: The Winter Wonderland, Michigan.
Re: Wilesco stationary engine and aquarium pump questions?
« Reply #9 on: January 20, 2021, 04:07:37 pm »
One more thing to remember and check. Once the air pump and steam engine are running, check for leaks,
with a little spritz of water around the fittings and steam line. Even a small leak will rob you of
performance and if you wait to check when under steam, it could really get messy.
Logged
Tommy

"Steam it, like you mean it."

  • Administrator
  • Engineer
  • *****
  • Posts: 6280
  • Aussie Steamer always on the boil :)
  • Location: South Coast of New South Wales Australia
Re: Wilesco stationary engine and aquarium pump questions?
« Reply #10 on: January 20, 2021, 04:54:22 pm »
Quote from: ShadetreeMotorcycle on January 20, 2021, 11:49:48 am
Hello, I have recently got the bug to get a model stationary steam engine! I have a few questions:



Highlighted the 'a' there's no such thing as "I have recently got the bug to get a model stationary steam engine"!

Start clearing shelf space.....steam engines incoming.


 ;D  ;D  ;D  ;D  ;D  ;D  ;D  ;D  ;D  ;D  ;D  ;D
Logged
_______________________________________________
Cheers.
Jim

Blue Heelers Model & Toy Steam Engine Room YouTube Channel -
 https://www.youtube.com/user/Blue123Heeler/videos

  • Full Member
  • ***
  • Posts: 855
Re: Wilesco stationary engine and aquarium pump questions?
« Reply #11 on: January 20, 2021, 05:55:35 pm »
Haha!....thanks for the Warning Jim....I like to find good deals and nothing is jumping out at me right now on eBay...

I did find a 100 year anniversary D10 but that model does not have a throttle valve as far as I can see....could a handy guy add one? Seems a fairly simple thing...

Not really sure that is a great idea...from my shopping I kinda have my heart set on a Wilesco D20...or possibly a D16
Logged

  • Global Moderator
  • Engineer
  • *****
  • Posts: 5596
  • Location: St. Paul Indiana
Re: Wilesco stationary engine and aquarium pump questions?
« Reply #12 on: January 20, 2021, 06:35:59 pm »
Quote from: ShadetreeMotorcycle on January 20, 2021, 05:55:35 pm
Haha!....thanks for the Warning Jim....I like to find good deals and nothing is jumping out at me right now on eBay...

I did find a 100 year anniversary D10 but that model does not have a throttle valve as far as I can see....could a handy guy add one? Seems a fairly simple thing...

Not really sure that is a great idea...from my shopping I kinda have my heart set on a Wilesco D20...or possibly a D16
The D18 ,D20,D21,D22 all share the same (larger) boiler than the D16 ,  actually twice the capacity.
Logged
Bruce, St. Paul Indiana, USA
"Originality thrives in seclusion free of outside influences beating upon us to cripple the creative mind."
  Nikola Tesla
Pages: [1]
« previous next »